Impelement a basic logger, WIP

rework interrupts

.cargo/config.toml

@@ -1,5 +1,2 @@
-[build]
-target = "aarch64-unknown-none"
-
 [target.aarch64-unknown-none]
 rustflags = ["-C", "link-arg=-Tlink.ld"]

.github/workflows/rust.yml

@@ -0,0 +1,47 @@
+name: Rust
+
+on:
+  push:
+  pull_request:
+    branches: ["master"]
+
+env:
+  CARGO_TERM_COLOR: always
+
+jobs:
+  lint:
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install rustfmt for nightly
+        run: rustup component add --toolchain nightly-x86_64-unknown-linux-gnu rustfmt clippy
+      - name: Add AArch64 Target
+        run: rustup target add aarch64-unknown-none
+      - name: Run format check
+        run: cargo fmt --check
+      - name: Run lint
+        run: cargo clippy --target aarch64-unknown-none -- -D warnings
+  build:
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install rustfmt for nightly
+        run: rustup component add --toolchain nightly-x86_64-unknown-linux-gnu rustfmt clippy
+      - name: Add AArch64 Target
+        run: rustup target add aarch64-unknown-none
+      - name: Build
+        run: cargo build --verbose --target aarch64-unknown-none
+
+  test:
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v4
+      - name: Install rustfmt for nightly
+        run: rustup component add --toolchain nightly-x86_64-unknown-linux-gnu rustfmt clippy
+      - name: Add AArch64 Target
+        run: rustup target add aarch64-unknown-none
+      - name: Heap Workspace Test
+        run: cargo test -p heap

.gitignore

@@ -2,3 +2,5 @@
 kernel8.img
 .env
 sd.img
+settings.json
+.DS_Store

.vscode/launch.json

@@ -1,5 +1,12 @@
 {
   "version": "0.2.0",
+  "compounds": [
+    {
+      "name": "Run QEMU + Attach LLDB",
+      "configurations": ["Attach LLDB"],
+      "preLaunchTask": "Run QEMU"
+    }
+  ],
   "configurations": [
     {
       "name": "Attach to QEMU (AArch64)",
@@ -20,11 +27,21 @@
         },
         {
           "description": "Show assembly on stop",
-    "text": "layout asm",
+          "text": "set disassemble-next-line on",
           "ignoreFailures": true
         }
       ],
       "preLaunchTask": "Run QEMU"
+    },
+
+    {
+      "name": "Attach LLDB",
+      "type": "lldb",
+      "request": "attach",
+      "debugServer": 1234,
+      "program": "${workspaceFolder}/target/aarch64-unknown-none/debug/nova",
+      "stopOnEntry": true,
+      "processCreateCommands": ["gdb-remote localhost:1234"]
     }
   ]
 }

.vscode/tasks.json

@@ -14,7 +14,7 @@
     {
       "label": "Run QEMU",
       "type": "shell",
-      "command": "qemu-system-aarch64 -M raspi3b -cpu cortex-a53 -serial stdio -sd sd.img -display none -kernel ${workspaceFolder}/target/aarch64-unknown-none/debug/kernel8.img -S -s",
+      "command": "llvm-objcopy -O binary target/aarch64-unknown-none/debug/nova target/aarch64-unknown-none/debug/kernel8.img && qemu-system-aarch64 -M raspi3b -cpu cortex-a53 -serial stdio -sd sd.img -kernel ${workspaceFolder}/target/aarch64-unknown-none/debug/kernel8.img -S -s -m 1024",
       "isBackground": true,
       "dependsOn": ["Build"]
     }

Cargo.lock

@@ -2,6 +2,167 @@
 # It is not intended for manual editing.
 version = 4
 
+[[package]]
+name = "cfg-if"
+version = "1.0.4"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "9330f8b2ff13f34540b44e946ef35111825727b38d33286ef986142615121801"
+
+[[package]]
+name = "getrandom"
+version = "0.3.4"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "899def5c37c4fd7b2664648c28120ecec138e4d395b459e5ca34f9cce2dd77fd"
+dependencies = [
+ "cfg-if",
+ "libc",
+ "r-efi",
+ "wasip2",
+]
+
+[[package]]
+name = "heap"
+version = "0.1.0"
+dependencies = [
+ "nova_error",
+ "rand",
+]
+
+[[package]]
+name = "libc"
+version = "0.2.178"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "37c93d8daa9d8a012fd8ab92f088405fb202ea0b6ab73ee2482ae66af4f42091"
+
+[[package]]
+name = "libm"
+version = "0.2.15"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f9fbbcab51052fe104eb5e5d351cf728d30a5be1fe14d9be8a3b097481fb97de"
+
 [[package]]
 name = "nova"
 version = "0.1.0"
+dependencies = [
+ "heap",
+ "libm",
+ "nova_error",
+]
+
+[[package]]
+name = "nova_error"
+version = "0.1.0"
+
+[[package]]
+name = "ppv-lite86"
+version = "0.2.21"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "85eae3c4ed2f50dcfe72643da4befc30deadb458a9b590d720cde2f2b1e97da9"
+dependencies = [
+ "zerocopy",
+]
+
+[[package]]
+name = "proc-macro2"
+version = "1.0.103"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "5ee95bc4ef87b8d5ba32e8b7714ccc834865276eab0aed5c9958d00ec45f49e8"
+dependencies = [
+ "unicode-ident",
+]
+
+[[package]]
+name = "quote"
+version = "1.0.42"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "a338cc41d27e6cc6dce6cefc13a0729dfbb81c262b1f519331575dd80ef3067f"
+dependencies = [
+ "proc-macro2",
+]
+
+[[package]]
+name = "r-efi"
+version = "5.3.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "69cdb34c158ceb288df11e18b4bd39de994f6657d83847bdffdbd7f346754b0f"
+
+[[package]]
+name = "rand"
+version = "0.9.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "6db2770f06117d490610c7488547d543617b21bfa07796d7a12f6f1bd53850d1"
+dependencies = [
+ "rand_chacha",
+ "rand_core",
+]
+
+[[package]]
+name = "rand_chacha"
+version = "0.9.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "d3022b5f1df60f26e1ffddd6c66e8aa15de382ae63b3a0c1bfc0e4d3e3f325cb"
+dependencies = [
+ "ppv-lite86",
+ "rand_core",
+]
+
+[[package]]
+name = "rand_core"
+version = "0.9.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "99d9a13982dcf210057a8a78572b2217b667c3beacbf3a0d8b454f6f82837d38"
+dependencies = [
+ "getrandom",
+]
+
+[[package]]
+name = "syn"
+version = "2.0.111"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "390cc9a294ab71bdb1aa2e99d13be9c753cd2d7bd6560c77118597410c4d2e87"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "unicode-ident",
+]
+
+[[package]]
+name = "unicode-ident"
+version = "1.0.22"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "9312f7c4f6ff9069b165498234ce8be658059c6728633667c526e27dc2cf1df5"
+
+[[package]]
+name = "wasip2"
+version = "1.0.1+wasi-0.2.4"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "0562428422c63773dad2c345a1882263bbf4d65cf3f42e90921f787ef5ad58e7"
+dependencies = [
+ "wit-bindgen",
+]
+
+[[package]]
+name = "wit-bindgen"
+version = "0.46.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f17a85883d4e6d00e8a97c586de764dabcc06133f7f1d55dce5cdc070ad7fe59"
+
+[[package]]
+name = "zerocopy"
+version = "0.8.31"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "fd74ec98b9250adb3ca554bdde269adf631549f51d8a8f8f0a10b50f1cb298c3"
+dependencies = [
+ "zerocopy-derive",
+]
+
+[[package]]
+name = "zerocopy-derive"
+version = "0.8.31"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "d8a8d209fdf45cf5138cbb5a506f6b52522a25afccc534d1475dad8e31105c6a"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "syn",
+]

Cargo.toml

@@ -6,6 +6,19 @@ edition = "2021"
 
 [profile.dev]
 panic = "abort"
+debug = true
+opt-level = 0
 
 [profile.release]
 panic = "abort"
+
+[dependencies]
+libm = "0.2.15"
+heap = {path = "heap"}
+nova_error = {path = "nova_error"}
+
+[workspace]
+
+members = [ "nova_error",
+    "heap"
+]

README.md

@@ -2,14 +2,20 @@
 
 NovaOS is a expository project where I build a kernel from scratch for a Raspberry PI 3 B+.
 
-[Technical write-up](https://blog.leafnova.net/projects/pi3_kernel/)
+[Technical write-up](https://leafnova.net/projects/pi3_kernel/)
 
 ## Features
 
 - Delay and sleep ✓
 - UART ✓
+- Switching ELs ✓
 - GPIOs ✓
 - GPIO Interrupts ✓
-- Frame Buffer
+- Communicate with peripherals via mailboxes ✓
+- Frame Buffer ✓
+- Heap Memory allocation ✓
+- Multi Core
+- Dynamic clock speed
 - MMU
+- Multiprocessing
 - Basic Terminal over UART

heap/Cargo.toml

@@ -0,0 +1,10 @@
+[package]
+name = "heap"
+version = "0.1.0"
+edition = "2024"
+
+[dependencies]
+nova_error = {path = "../nova_error"}
+
+[dev-dependencies]
+rand = "0.9.2"

heap/src/lib.rs

@@ -0,0 +1,200 @@
+#![allow(static_mut_refs)]
+#![cfg_attr(not(test), no_std)]
+
+use core::{
+    alloc::GlobalAlloc,
+    mem::size_of,
+    prelude::v1::*,
+    ptr::{self, null_mut},
+    result::Result,
+};
+
+use nova_error::NovaError;
+
+extern crate alloc;
+
+#[repr(C, align(16))]
+#[derive(Clone, Copy)]
+struct HeapHeader {
+    next: Option<*mut HeapHeader>,
+    before: Option<*mut HeapHeader>,
+    size: usize,
+    free: bool,
+}
+
+const HEAP_HEADER_SIZE: usize = size_of::<HeapHeader>();
+const MIN_BLOCK_SIZE: usize = 16;
+
+pub struct Heap {
+    start_address: *mut HeapHeader,
+    end_address: *mut HeapHeader,
+    raw_size: usize,
+}
+impl Heap {
+    pub const fn empty() -> Self {
+        Self {
+            start_address: null_mut(),
+            end_address: null_mut(),
+            raw_size: 0,
+        }
+    }
+
+    pub fn init(&mut self, heap_start: usize, heap_end: usize) {
+        self.start_address = heap_start as *mut HeapHeader;
+        self.end_address = heap_end as *mut HeapHeader;
+
+        self.raw_size = heap_end - heap_start + 1;
+
+        unsafe {
+            ptr::write(
+                self.start_address,
+                HeapHeader {
+                    next: None,
+                    before: None,
+                    size: self.raw_size - HEAP_HEADER_SIZE,
+                    free: true,
+                },
+            );
+        }
+    }
+
+    unsafe fn find_first_fit(&self, size: usize) -> Result<*mut HeapHeader, NovaError> {
+        let mut current = self.start_address;
+        unsafe {
+            while !fits(size, current) {
+                if let Some(next) = (*current).next {
+                    current = next;
+                } else {
+                    return Err(NovaError::HeapFull);
+                }
+            }
+        }
+        Ok(current)
+    }
+
+    fn malloc(&self, mut size: usize) -> Result<*mut u8, NovaError> {
+        if size == 0 {
+            return Err(NovaError::EmptyHeapSegmentNotAllowed);
+        }
+
+        if size < MIN_BLOCK_SIZE {
+            size = MIN_BLOCK_SIZE;
+        }
+
+        // Align size to the next 16 bytes
+        size += (16 - (size % 16)) % 16;
+
+        unsafe {
+            // Find First-Fit memory segment
+            let current = self.find_first_fit(size)?;
+
+            // Return entire block WITHOUT generating a new header
+            // if the current block doesn't have enough space to hold: requested size + HEAP_HEADER_SIZE + MIN_BLOCK_SIZE
+            if (*current).size < size + HEAP_HEADER_SIZE + MIN_BLOCK_SIZE {
+                (*current).free = false;
+                return Ok(current.byte_add(HEAP_HEADER_SIZE) as *mut u8);
+            }
+
+            Self::fragment_segment(current, size);
+
+            let data_start_address = current.byte_add(HEAP_HEADER_SIZE);
+
+            Ok(data_start_address as *mut u8)
+        }
+    }
+
+    unsafe fn fragment_segment(current: *mut HeapHeader, size: usize) {
+        let byte_offset = HEAP_HEADER_SIZE + size;
+        let new_address = unsafe { current.byte_add(byte_offset) };
+
+        // Handle case where fragmenting center free space
+        unsafe {
+            let next = (*current).next;
+            if let Some(next) = next {
+                (*next).before = Some(new_address);
+            }
+
+            ptr::write(
+                new_address,
+                HeapHeader {
+                    next,
+                    before: Some(current),
+                    size: (*current).size - byte_offset,
+                    free: true,
+                },
+            );
+
+            (*current).next = Some(new_address);
+            (*current).free = false;
+            (*current).size = size;
+        }
+    }
+
+    fn free(&self, pointer: *mut u8) -> Result<(), NovaError> {
+        let mut segment = Self::get_header_ref_from_data_pointer(pointer);
+        unsafe {
+            // IF prev is free:
+            // Delete header, add size to previous and fix pointers.
+            // Move Head left
+            if let Some(before_head) = (*segment).before
+                && (*before_head).free
+            {
+                (*before_head).size += (*segment).size + HEAP_HEADER_SIZE;
+                delete_header(segment);
+                segment = before_head;
+            }
+
+            // IF next is free:
+            // Delete next header and merge size, fix pointers
+            if let Some(next_head) = (*segment).next
+                && (*next_head).free
+            {
+                (*segment).size += (*next_head).size + HEAP_HEADER_SIZE;
+                delete_header(next_head);
+            }
+
+            // Neither: Set free
+            (*segment).free = true;
+        }
+
+        Ok(())
+    }
+
+    const fn get_header_ref_from_data_pointer(pointer: *mut u8) -> *mut HeapHeader {
+        unsafe { pointer.sub(HEAP_HEADER_SIZE) as *mut HeapHeader }
+    }
+}
+
+unsafe impl GlobalAlloc for Heap {
+    unsafe fn alloc(&self, layout: core::alloc::Layout) -> *mut u8 {
+        self.malloc(layout.size()).unwrap()
+    }
+
+    unsafe fn dealloc(&self, ptr: *mut u8, _: core::alloc::Layout) {
+        self.free(ptr).unwrap();
+    }
+}
+
+unsafe impl Sync for Heap {}
+
+unsafe fn fits(size: usize, header: *mut HeapHeader) -> bool {
+    unsafe { (*header).free && size <= (*header).size }
+}
+
+unsafe fn delete_header(header: *mut HeapHeader) {
+    unsafe {
+        let before_opt = (*header).before;
+        let next_opt = (*header).next;
+
+        if let Some(before) = before_opt {
+            (*before).next = next_opt;
+        }
+
+        if let Some(next) = next_opt {
+            (*next).before = before_opt;
+        }
+    }
+}
+
+#[cfg(test)]
+mod tests;

heap/src/tests.rs

@@ -0,0 +1,165 @@
+use super::*;
+use rand::{self, random_range};
+extern crate std;
+
+static HEAP_SIZE: usize = 1024;
+
+#[test]
+fn test_heap_allocation() {
+    let heap_vector = Box::new([0u8; HEAP_SIZE]);
+    let mut heap = Heap::empty();
+    heap.init(
+        &heap_vector[0] as *const u8 as usize,
+        &heap_vector[HEAP_SIZE - 1] as *const u8 as usize,
+    );
+
+    let root_header = heap.start_address;
+
+    let malloc_size = random_range(0..(HEAP_SIZE - HEAP_HEADER_SIZE));
+    let malloc = heap.malloc(malloc_size).unwrap();
+    let malloc_header = Heap::get_header_ref_from_data_pointer(malloc);
+
+    assert_eq!(root_header, malloc_header);
+
+    unsafe {
+        let actual_alloc_size = (*malloc_header).size;
+        let actual_raw_size = actual_alloc_size + HEAP_HEADER_SIZE;
+        // Verify sizing
+        assert!(actual_alloc_size >= malloc_size);
+        assert_eq!(actual_alloc_size % MIN_BLOCK_SIZE, 0);
+
+        // Verify section is occupied
+        assert!((*malloc_header).free == false);
+
+        // Verify next header has been created
+        let next = (*malloc_header).next.unwrap();
+
+        assert_eq!(malloc_header.byte_add(actual_raw_size), next);
+        assert!((*next).free);
+        assert_eq!((*malloc_header).next.unwrap(), next);
+        assert_eq!((*next).before.unwrap(), malloc_header);
+        assert_eq!((*next).size, HEAP_SIZE - actual_raw_size - HEAP_HEADER_SIZE)
+    }
+}
+
+#[test]
+fn test_full_heap() {
+    let heap_vector = Box::new([0u8; HEAP_SIZE]);
+    let mut heap = Heap::empty();
+    heap.init(
+        &heap_vector[0] as *const u8 as usize,
+        &heap_vector[HEAP_SIZE - 1] as *const u8 as usize,
+    );
+
+    let malloc_size = HEAP_SIZE - HEAP_HEADER_SIZE;
+    let malloc = heap.malloc(malloc_size).unwrap();
+    let malloc_header = Heap::get_header_ref_from_data_pointer(malloc);
+    unsafe {
+        assert_eq!((*malloc_header).free, false);
+        assert!((*malloc_header).next.is_none());
+    }
+
+    let malloc2 = heap.malloc(MIN_BLOCK_SIZE);
+    assert!(malloc2.is_err());
+}
+
+#[test]
+fn test_freeing_root() {
+    let heap_vector = Box::new([0u8; HEAP_SIZE]);
+    let mut heap = Heap::empty();
+    heap.init(
+        &heap_vector[0] as *const u8 as usize,
+        &heap_vector[HEAP_SIZE - 1] as *const u8 as usize,
+    );
+
+    let root_header = heap.start_address;
+    let root_header_start_size = unsafe { (*root_header).size };
+
+    let malloc_size = random_range(0..((HEAP_SIZE - HEAP_HEADER_SIZE) / 2));
+    let malloc = heap.malloc(malloc_size).unwrap();
+    let malloc_header = Heap::get_header_ref_from_data_pointer(malloc);
+    unsafe {
+        assert_eq!((*malloc_header).free, false);
+        assert!((*malloc_header).size >= malloc_size);
+        assert!((*root_header).next.is_some());
+
+        assert!(heap.free(malloc).is_ok());
+
+        assert_eq!((*root_header).size, root_header_start_size);
+        assert!((*root_header).next.is_none());
+    }
+}
+
+#[test]
+fn test_merging_free_sections() {
+    let heap_vector = Box::new([0u8; HEAP_SIZE]);
+    let mut heap = Heap::empty();
+    heap.init(
+        &heap_vector[0] as *const u8 as usize,
+        &heap_vector[HEAP_SIZE - 1] as *const u8 as usize,
+    );
+
+    let root_header = heap.start_address;
+    let root_header_start_size = unsafe { (*root_header).size };
+
+    let malloc1 = heap.malloc(MIN_BLOCK_SIZE).unwrap();
+    let malloc_header_before = unsafe { *Heap::get_header_ref_from_data_pointer(malloc1) };
+    let malloc2 = heap.malloc(MIN_BLOCK_SIZE).unwrap();
+    let _ = heap.malloc(MIN_BLOCK_SIZE).unwrap();
+
+    unsafe {
+        assert!(heap.free(malloc1).is_ok());
+
+        let malloc_header_free = *Heap::get_header_ref_from_data_pointer(malloc1);
+        assert_ne!(malloc_header_before.free, malloc_header_free.free);
+        assert_eq!(malloc_header_before.size, malloc_header_free.size);
+
+        assert!(heap.free(malloc2).is_ok());
+        let malloc_header_merge = *Heap::get_header_ref_from_data_pointer(malloc1);
+
+        assert!(malloc_header_merge.free);
+        assert_eq!(
+            malloc_header_merge.size,
+            malloc_header_free.size + MIN_BLOCK_SIZE + HEAP_HEADER_SIZE
+        );
+    }
+}
+
+#[test]
+fn test_first_fit() {
+    let heap_vector = Box::new([0u8; HEAP_SIZE]);
+    let mut heap = Heap::empty();
+    heap.init(
+        &heap_vector[0] as *const u8 as usize,
+        &heap_vector[HEAP_SIZE - 1] as *const u8 as usize,
+    );
+
+    let root_header = heap.start_address;
+    let root_header_start_size = unsafe { (*root_header).size };
+
+    let malloc1 = heap.malloc(MIN_BLOCK_SIZE).unwrap();
+    let malloc2 = heap.malloc(MIN_BLOCK_SIZE).unwrap();
+    let malloc3 = heap.malloc(MIN_BLOCK_SIZE * 3).unwrap();
+    let malloc4 = heap.malloc(MIN_BLOCK_SIZE).unwrap();
+
+    unsafe {
+        assert!(heap.free(malloc1).is_ok());
+        assert!(heap.free(malloc3).is_ok());
+        let malloc5 = heap.malloc(MIN_BLOCK_SIZE * 2).unwrap();
+        let malloc1_header = unsafe { *Heap::get_header_ref_from_data_pointer(malloc1) };
+
+        // First free block stays empty
+        assert!(malloc1_header.free);
+
+        // New allocation takes the first fit aka. malloc3
+        assert_eq!(malloc5, malloc3);
+
+        // If no free slot could be found, append to the end
+        let malloc6 = heap.malloc(MIN_BLOCK_SIZE * 2).unwrap();
+        assert!(malloc6 > malloc4);
+
+        // Malloc7 takes slot of Malloc1
+        let malloc7 = heap.malloc(MIN_BLOCK_SIZE).unwrap();
+        assert_eq!(malloc1, malloc7);
+    }
+}

link.ld

@@ -27,13 +27,27 @@ SECTIONS {
         KEEP(*(.vector_table))
     }
 
-    .stack 0x8008000 : ALIGN(16)
+    .heap : ALIGN(16)
+    {
+    __heap_start = .;
+    . += 0x10000; #10kB
+    __heap_end = .;
+    }
+
+    .stack : ALIGN(16)
     {
     __stack_start = .;
-    .+=0x10000;
+    . += 0x10000; #10kB stack
     __stack_end = .;
     }
 
+    .stack_el0 : ALIGN(16)
+    {
+    __stack_start_el0 = .;
+    . += 0x10000; #10kB stack
+    __stack_end_el0 = .;
+    }
+
 
     _end = .;
 }

nova_error/Cargo.toml

@@ -0,0 +1,4 @@
+[package]
+name = "nova_error"
+version = "0.1.0"
+edition = "2024"

nova_error/src/lib.rs

@@ -0,0 +1,11 @@
+#![no_std]
+
+use core::fmt::Debug;
+use core::prelude::rust_2024::derive;
+
+#[derive(Debug)]
+pub enum NovaError {
+    Mailbox,
+    HeapFull,
+    EmptyHeapSegmentNotAllowed,
+}

src/configuration.rs

@@ -0,0 +1,16 @@
+static SCTLR_EL1_MMU_DISABLED: u64 = 0; //M
+static SCTLR_EL1_DATA_CACHE_DISABLED: u64 = 0 << 2; //C
+static SCTLR_EL1_INSTRUCTION_CACHE_DISABLED: u64 = 0 << 12; //I
+static SCTLR_EL1_LITTLE_ENDIAN_EL0: u64 = 0 << 24; //E0E
+static SCTLR_EL1_LITTLE_ENDIAN_EL1: u64 = 0 << 25; //EE
+
+#[allow(clippy::identity_op)]
+static SCTLR_EL1_RES: u64 = (0 << 6) | (1 << 11) | (0 << 17) | (1 << 20) | (1 << 22); //Res0 & Res1
+
+#[no_mangle]
+pub static SCTLR_EL1_CONF: u64 = SCTLR_EL1_MMU_DISABLED
+    | SCTLR_EL1_DATA_CACHE_DISABLED
+    | SCTLR_EL1_INSTRUCTION_CACHE_DISABLED
+    | SCTLR_EL1_LITTLE_ENDIAN_EL0
+    | SCTLR_EL1_LITTLE_ENDIAN_EL1
+    | SCTLR_EL1_RES;

src/framebuffer.rs

@@ -0,0 +1,250 @@
+use core::ptr::write_volatile;
+
+mod bitmaps;
+
+use bitmaps::BASIC_LEGACY;
+
+use crate::{
+    mailbox::{read_mailbox, write_mailbox},
+    println,
+};
+#[repr(align(16))]
+struct Mailbox([u32; 36]);
+
+const ALLOCATE_BUFFER: u32 = 0x0004_0001;
+const SET_PHYSICAL_DISPLAY_WH: u32 = 0x0004_8003;
+const SET_VIRTUAL_DISPLAY_WH: u32 = 0x0004_8004;
+const SET_PIXEL_DEPTH: u32 = 0x0004_8005;
+const SET_PIXEL_ORDER: u32 = 0x0004_8006;
+const GET_PITCH: u32 = 0x000_40008;
+const SET_FB_OFFSET: u32 = 0x0004_8009;
+
+#[allow(dead_code)]
+pub struct FrameBuffer {
+    pixel_depth: u32, // Bits per pixel
+    pitch: u32,       // Pixel per row
+    rows: u32,        // Rows
+    start_addr: *mut u32,
+    size: u32, //Bytes
+}
+
+pub const RED: u32 = 0x00FF0000;
+pub const GREEN: u32 = 0x0000FF00;
+pub const BLUE: u32 = 0x000000FF;
+pub const ORANGE: u32 = 0x00FFA500;
+pub const YELLOW: u32 = 0x00FFFF00;
+
+impl FrameBuffer {
+    pub fn draw_pixel(&self, x: u32, y: u32, color: u32) {
+        let offset = x + y * self.pitch;
+        unsafe {
+            write_volatile(self.start_addr.add(offset as usize), color);
+        }
+    }
+
+    /*Bresenham's line algorithm
+    TODO: check if its possible to optimize y1==y2 case (ARM neon?)
+    */
+    #[allow(clippy::collapsible_else_if)]
+    pub fn draw_line(&self, x1: u32, y1: u32, x2: u32, y2: u32, color: u32) {
+        if x1 == x2 {
+            for y in y1..=y2 {
+                self.draw_pixel(x1, y, color);
+            }
+            return;
+        }
+
+        if (y2 as i32 - y1 as i32).abs() < (x2 as i32 - x1 as i32).abs() {
+            if x1 > x2 {
+                self.plot_line_low(x2, y2, x1, y1, color);
+            } else {
+                self.plot_line_low(x1, y1, x2, y2, color);
+            }
+        } else {
+            if y1 > y2 {
+                self.plot_line_high(x2, y2, x1, y1, color);
+            } else {
+                self.plot_line_high(x1, y1, x2, y2, color);
+            }
+        }
+    }
+
+    pub fn draw_square(&self, x1: u32, y1: u32, x2: u32, y2: u32, color: u32) {
+        self.draw_line(x1, y1, x2, y1, color);
+        self.draw_line(x1, y2, x2, y2, color);
+        self.draw_line(x1, y1, x1, y2, color);
+        self.draw_line(x2, y1, x2, y2, color);
+    }
+
+    pub fn draw_square_fill(&self, x1: u32, y1: u32, x2: u32, y2: u32, color: u32) {
+        let mut y_start = y1;
+        let mut y_end = y2;
+
+        if y2 < y1 {
+            y_start = y2;
+            y_end = y1;
+        }
+
+        for y in y_start..=y_end {
+            self.draw_line(x1, y, x2, y, color);
+        }
+    }
+
+    fn plot_line_low(&self, x1: u32, y1: u32, x2: u32, y2: u32, color: u32) {
+        let dx = x2 as i32 - x1 as i32;
+        let mut dy = y2 as i32 - y1 as i32;
+        let mut yi = 1;
+
+        let mut d = 2 * dy - dx;
+        let mut y = y1 as i32;
+
+        if dy < 0 {
+            yi = -1;
+            dy = -dy;
+        }
+
+        for x in x1..=x2 {
+            self.draw_pixel(x, y as u32, color);
+            if d > 0 {
+                y += yi;
+                d += 2 * (dy - dx);
+            } else {
+                d += 2 * dy;
+            }
+        }
+    }
+    fn plot_line_high(&self, x1: u32, y1: u32, x2: u32, y2: u32, color: u32) {
+        let mut dx = x2 as i32 - x1 as i32;
+        let dy = y2 as i32 - y1 as i32;
+        let mut xi: i32 = 1;
+
+        let mut d = 2 * dy - dx;
+        let mut x = x1 as i32;
+
+        if dx < 0 {
+            xi = -1;
+            dx = -dx;
+        }
+
+        for y in y1..=y2 {
+            self.draw_pixel(x as u32, y, color);
+            if d > 0 {
+                x += xi;
+                d += 2 * (dx - dy);
+            } else {
+                d += 2 * dx;
+            }
+        }
+    }
+
+    //TODO: Scale in pixels
+    pub fn draw_string(&self, string: &str, x: u32, mut y: u32, scale: u32, color: u32) {
+        let mut offset = 0;
+        for c in string.bytes() {
+            match c {
+                b'\n' => {
+                    y += 8 * scale;
+                    offset = 0;
+                }
+                _ => {
+                    self.draw_ascii(x + (offset as u32 * 8 * scale), y, c as usize, scale, color);
+                    offset += 1
+                }
+            }
+        }
+    }
+
+    fn draw_ascii(&self, x: u32, y: u32, char: usize, scale: u32, color: u32) {
+        for (y_offset, row) in BASIC_LEGACY[char].iter().enumerate() {
+            for bit in 0..8 {
+                match row & (1 << bit) {
+                    0 => {}
+                    _ => self.draw_square_fill(
+                        x + (bit * scale),
+                        y + (y_offset as u32 * scale),
+                        x + ((bit + 1) * scale),
+                        y + ((y_offset + 1) as u32 * scale),
+                        color,
+                    ),
+                }
+            }
+        }
+    }
+
+    pub fn draw_function(&self, f: fn(u32) -> f64, x_offset: i32, y_offset: i32, color: u32) {
+        for x in 0..self.pitch as i32 {
+            let y = f(x as u32);
+            self.draw_pixel((x + x_offset) as u32, (y + y_offset as f64) as u32, color);
+        }
+    }
+}
+
+impl Default for FrameBuffer {
+    fn default() -> Self {
+        let mut mailbox = Mailbox([0; 36]);
+        mailbox.0[0] = 35 * 4;
+        mailbox.0[1] = 0;
+
+        mailbox.0[2] = SET_PHYSICAL_DISPLAY_WH;
+        mailbox.0[3] = 8;
+        mailbox.0[4] = 8;
+        mailbox.0[5] = 1920;
+        mailbox.0[6] = 1080;
+
+        mailbox.0[7] = SET_VIRTUAL_DISPLAY_WH;
+        mailbox.0[8] = 8;
+        mailbox.0[9] = 8;
+        mailbox.0[10] = 1920;
+        mailbox.0[11] = 1080;
+
+        mailbox.0[12] = SET_PIXEL_DEPTH;
+        mailbox.0[13] = 4;
+        mailbox.0[14] = 4;
+        mailbox.0[15] = 32; // 32 bit per pixel
+
+        mailbox.0[16] = SET_PIXEL_ORDER;
+        mailbox.0[17] = 4;
+        mailbox.0[18] = 4;
+        mailbox.0[19] = 0x0; // RGB
+
+        mailbox.0[20] = SET_FB_OFFSET;
+        mailbox.0[21] = 8;
+        mailbox.0[22] = 8;
+        mailbox.0[23] = 0; // X in pixels
+        mailbox.0[24] = 0; // Y in pixels
+
+        mailbox.0[25] = ALLOCATE_BUFFER;
+        mailbox.0[26] = 8;
+        mailbox.0[27] = 4;
+        mailbox.0[28] = 4096; // Alignment
+        mailbox.0[29] = 0;
+
+        mailbox.0[30] = GET_PITCH;
+        mailbox.0[31] = 4;
+        mailbox.0[32] = 0;
+        mailbox.0[33] = 0;
+
+        mailbox.0[34] = 0; // End tag
+
+        // TODO: validate responses
+
+        let addr = core::ptr::addr_of!(mailbox.0[0]) as u32;
+
+        write_mailbox(8, addr);
+
+        let _ = read_mailbox(8);
+        if mailbox.0[1] == 0 {
+            println!("Failed");
+        }
+
+        mailbox.0[28] &= 0x3FFFFFFF;
+
+        Self {
+            pixel_depth: mailbox.0[15],
+            pitch: mailbox.0[33] / (mailbox.0[15] / 8),
+            rows: mailbox.0[29] / mailbox.0[33],
+            start_addr: mailbox.0[28] as *mut u32,
+            size: mailbox.0[29],
+        }
+    }
+}

src/framebuffer/bitmaps.rs

@@ -0,0 +1,132 @@
+pub const NOTHING_TO_DISPLAY: [u8; 8] = [0x00; 8];
+
+pub const BASIC_LEGACY: [[u8; 8]; 128] = [
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    NOTHING_TO_DISPLAY,
+    [0x18, 0x3C, 0x3C, 0x18, 0x18, 0x00, 0x18, 0x00],
+    [0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00],
+    [0x36, 0x36, 0x7F, 0x36, 0x7F, 0x36, 0x36, 0x00],
+    [0x0C, 0x3E, 0x03, 0x1E, 0x30, 0x1F, 0x0C, 0x00],
+    [0x00, 0x63, 0x33, 0x18, 0x0C, 0x66, 0x63, 0x00],
+    [0x1C, 0x36, 0x1C, 0x6E, 0x3B, 0x33, 0x6E, 0x00],
+    [0x06, 0x06, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00],
+    [0x18, 0x0C, 0x06, 0x06, 0x06, 0x0C, 0x18, 0x00],
+    [0x06, 0x0C, 0x18, 0x18, 0x18, 0x0C, 0x06, 0x00],
+    [0x00, 0x66, 0x3C, 0xFF, 0x3C, 0x66, 0x00, 0x00],
+    [0x00, 0x0C, 0x0C, 0x3F, 0x0C, 0x0C, 0x00, 0x00],
+    [0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x0C, 0x06],
+    [0x00, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x00, 0x00],
+    [0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x0C, 0x00],
+    [0x60, 0x30, 0x18, 0x0C, 0x06, 0x03, 0x01, 0x00],
+    [0x3E, 0x63, 0x73, 0x7B, 0x6F, 0x67, 0x3E, 0x00],
+    [0x0C, 0x0E, 0x0C, 0x0C, 0x0C, 0x0C, 0x3F, 0x00],
+    [0x1E, 0x33, 0x30, 0x1C, 0x06, 0x33, 0x3F, 0x00],
+    [0x1E, 0x33, 0x30, 0x1C, 0x30, 0x33, 0x1E, 0x00],
+    [0x38, 0x3C, 0x36, 0x33, 0x7F, 0x30, 0x78, 0x00],
+    [0x3F, 0x03, 0x1F, 0x30, 0x30, 0x33, 0x1E, 0x00],
+    [0x1C, 0x06, 0x03, 0x1F, 0x33, 0x33, 0x1E, 0x00],
+    [0x3F, 0x33, 0x30, 0x18, 0x0C, 0x0C, 0x0C, 0x00],
+    [0x1E, 0x33, 0x33, 0x1E, 0x33, 0x33, 0x1E, 0x00],
+    [0x1E, 0x33, 0x33, 0x3E, 0x30, 0x18, 0x0E, 0x00],
+    [0x00, 0x0C, 0x0C, 0x00, 0x00, 0x0C, 0x0C, 0x00],
+    [0x00, 0x0C, 0x0C, 0x00, 0x00, 0x0C, 0x0C, 0x06],
+    [0x18, 0x0C, 0x06, 0x03, 0x06, 0x0C, 0x18, 0x00],
+    [0x00, 0x00, 0x3F, 0x00, 0x00, 0x3F, 0x00, 0x00],
+    [0x06, 0x0C, 0x18, 0x30, 0x18, 0x0C, 0x06, 0x00],
+    [0x1E, 0x33, 0x30, 0x18, 0x0C, 0x00, 0x0C, 0x00],
+    [0x3E, 0x63, 0x7B, 0x7B, 0x7B, 0x03, 0x1E, 0x00],
+    [0x0C, 0x1E, 0x33, 0x33, 0x3F, 0x33, 0x33, 0x00],
+    [0x3F, 0x66, 0x66, 0x3E, 0x66, 0x66, 0x3F, 0x00],
+    [0x3C, 0x66, 0x03, 0x03, 0x03, 0x66, 0x3C, 0x00],
+    [0x1F, 0x36, 0x66, 0x66, 0x66, 0x36, 0x1F, 0x00],
+    [0x7F, 0x46, 0x16, 0x1E, 0x16, 0x46, 0x7F, 0x00],
+    [0x7F, 0x46, 0x16, 0x1E, 0x16, 0x06, 0x0F, 0x00],
+    [0x3C, 0x66, 0x03, 0x03, 0x73, 0x66, 0x7C, 0x00],
+    [0x33, 0x33, 0x33, 0x3F, 0x33, 0x33, 0x33, 0x00],
+    [0x1E, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x1E, 0x00],
+    [0x78, 0x30, 0x30, 0x30, 0x33, 0x33, 0x1E, 0x00],
+    [0x67, 0x66, 0x36, 0x1E, 0x36, 0x66, 0x67, 0x00],
+    [0x0F, 0x06, 0x06, 0x06, 0x46, 0x66, 0x7F, 0x00],
+    [0x63, 0x77, 0x7F, 0x7F, 0x6B, 0x63, 0x63, 0x00],
+    [0x63, 0x67, 0x6F, 0x7B, 0x73, 0x63, 0x63, 0x00],
+    [0x1C, 0x36, 0x63, 0x63, 0x63, 0x36, 0x1C, 0x00],
+    [0x3F, 0x66, 0x66, 0x3E, 0x06, 0x06, 0x0F, 0x00],
+    [0x1E, 0x33, 0x33, 0x33, 0x3B, 0x1E, 0x38, 0x00],
+    [0x3F, 0x66, 0x66, 0x3E, 0x36, 0x66, 0x67, 0x00],
+    [0x1E, 0x33, 0x07, 0x0E, 0x38, 0x33, 0x1E, 0x00],
+    [0x3F, 0x2D, 0x0C, 0x0C, 0x0C, 0x0C, 0x1E, 0x00],
+    [0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x3F, 0x00],
+    [0x33, 0x33, 0x33, 0x33, 0x33, 0x1E, 0x0C, 0x00],
+    [0x63, 0x63, 0x63, 0x6B, 0x7F, 0x77, 0x63, 0x00],
+    [0x63, 0x63, 0x36, 0x1C, 0x1C, 0x36, 0x63, 0x00],
+    [0x33, 0x33, 0x33, 0x1E, 0x0C, 0x0C, 0x1E, 0x00],
+    [0x7F, 0x63, 0x31, 0x18, 0x4C, 0x66, 0x7F, 0x00],
+    [0x1E, 0x06, 0x06, 0x06, 0x06, 0x06, 0x1E, 0x00],
+    [0x03, 0x06, 0x0C, 0x18, 0x30, 0x60, 0x40, 0x00],
+    [0x1E, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1E, 0x00],
+    [0x08, 0x1C, 0x36, 0x63, 0x00, 0x00, 0x00, 0x00],
+    [0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF],
+    [0x0C, 0x0C, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00],
+    [0x00, 0x00, 0x1E, 0x30, 0x3E, 0x33, 0x6E, 0x00],
+    [0x07, 0x06, 0x06, 0x3E, 0x66, 0x66, 0x3B, 0x00],
+    [0x00, 0x00, 0x1E, 0x33, 0x03, 0x33, 0x1E, 0x00],
+    [0x38, 0x30, 0x30, 0x3e, 0x33, 0x33, 0x6E, 0x00],
+    [0x00, 0x00, 0x1E, 0x33, 0x3f, 0x03, 0x1E, 0x00],
+    [0x1C, 0x36, 0x06, 0x0f, 0x06, 0x06, 0x0F, 0x00],
+    [0x00, 0x00, 0x6E, 0x33, 0x33, 0x3E, 0x30, 0x1F],
+    [0x07, 0x06, 0x36, 0x6E, 0x66, 0x66, 0x67, 0x00],
+    [0x0C, 0x00, 0x0E, 0x0C, 0x0C, 0x0C, 0x1E, 0x00],
+    [0x30, 0x00, 0x30, 0x30, 0x30, 0x33, 0x33, 0x1E],
+    [0x07, 0x06, 0x66, 0x36, 0x1E, 0x36, 0x67, 0x00],
+    [0x0E, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x1E, 0x00],
+    [0x00, 0x00, 0x33, 0x7F, 0x7F, 0x6B, 0x63, 0x00],
+    [0x00, 0x00, 0x1F, 0x33, 0x33, 0x33, 0x33, 0x00],
+    [0x00, 0x00, 0x1E, 0x33, 0x33, 0x33, 0x1E, 0x00],
+    [0x00, 0x00, 0x3B, 0x66, 0x66, 0x3E, 0x06, 0x0F],
+    [0x00, 0x00, 0x6E, 0x33, 0x33, 0x3E, 0x30, 0x78],
+    [0x00, 0x00, 0x3B, 0x6E, 0x66, 0x06, 0x0F, 0x00],
+    [0x00, 0x00, 0x3E, 0x03, 0x1E, 0x30, 0x1F, 0x00],
+    [0x08, 0x0C, 0x3E, 0x0C, 0x0C, 0x2C, 0x18, 0x00],
+    [0x00, 0x00, 0x33, 0x33, 0x33, 0x33, 0x6E, 0x00],
+    [0x00, 0x00, 0x33, 0x33, 0x33, 0x1E, 0x0C, 0x00],
+    [0x00, 0x00, 0x63, 0x6B, 0x7F, 0x7F, 0x36, 0x00],
+    [0x00, 0x00, 0x63, 0x36, 0x1C, 0x36, 0x63, 0x00],
+    [0x00, 0x00, 0x33, 0x33, 0x33, 0x3E, 0x30, 0x1F],
+    [0x00, 0x00, 0x3F, 0x19, 0x0C, 0x26, 0x3F, 0x00],
+    [0x38, 0x0C, 0x0C, 0x07, 0x0C, 0x0C, 0x38, 0x00],
+    [0x18, 0x18, 0x18, 0x00, 0x18, 0x18, 0x18, 0x00],
+    [0x07, 0x0C, 0x0C, 0x38, 0x0C, 0x0C, 0x07, 0x00],
+    [0x6E, 0x3B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00],
+    NOTHING_TO_DISPLAY,
+];

src/interrupt_handlers.rs

@@ -0,0 +1,280 @@
+use core::arch::asm;
+
+use alloc::vec::Vec;
+
+use crate::{
+    get_current_el,
+    interrupt_handlers::daif::unmask_irq,
+    peripherals::{
+        gpio::{read_gpio_event_detect_status, reset_gpio_event_detect_status},
+        uart::clear_uart_interrupt_state,
+    },
+    println, read_address, write_address,
+};
+
+const INTERRUPT_BASE: u32 = 0x3F00_B000;
+const IRQ_PENDING_BASE: u32 = INTERRUPT_BASE + 0x204;
+const ENABLE_IRQ_BASE: u32 = INTERRUPT_BASE + 0x210;
+const DISABLE_IRQ_BASE: u32 = INTERRUPT_BASE + 0x21C;
+
+const GPIO_PENDING_BIT_OFFSET: u64 = 0b1111 << 49;
+
+struct InterruptHandlers {
+    source: IRQSource,
+    function: fn(),
+}
+
+// TODO: replace with hashmap and check for better alternatives for option
+static mut INTERRUPT_HANDLERS: Option<Vec<InterruptHandlers>> = None;
+
+#[derive(Clone)]
+#[repr(u32)]
+pub enum IRQSource {
+    AuxInt = 29,
+    I2cSpiSlvInt = 44,
+    Pwa0 = 45,
+    Pwa1 = 46,
+    Smi = 48,
+    GpioInt0 = 49,
+    GpioInt1 = 50,
+    GpioInt2 = 51,
+    GpioInt3 = 52,
+    I2cInt = 53,
+    SpiInt = 54,
+    PcmInt = 55,
+    UartInt = 57,
+}
+
+/// Representation of the ESR_ELx registers
+///
+///  Reference: D1.10.4
+#[derive(Debug, Clone, Copy)]
+#[allow(dead_code)]
+struct EsrElX {
+    ec: u32,
+    il: u32,
+    iss: u32,
+}
+
+impl From<u32> for EsrElX {
+    fn from(value: u32) -> Self {
+        Self {
+            ec: value >> 26,
+            il: (value >> 25) & 0b1,
+            iss: value & 0x1FFFFFF,
+        }
+    }
+}
+
+#[no_mangle]
+unsafe extern "C" fn rust_irq_handler() {
+    daif::mask_all();
+    let pending_irqs = get_irq_pending_sources();
+
+    if pending_irqs & GPIO_PENDING_BIT_OFFSET != 0 {
+        handle_gpio_interrupt();
+        let source_el = get_exception_return_exception_level() >> 2;
+        println!("Source EL: {}", source_el);
+        println!("Current EL: {}", get_current_el());
+        println!("Return register address: {:#x}", get_elr_el1());
+    }
+
+    if let Some(handler_vec) = unsafe { INTERRUPT_HANDLERS.as_ref() } {
+        for handler in handler_vec {
+            if (pending_irqs & (1 << (handler.source.clone() as u32))) != 0 {
+                (handler.function)();
+                clear_interrupt_for_source(handler.source.clone());
+            }
+        }
+    }
+}
+
+#[no_mangle]
+unsafe extern "C" fn rust_synchronous_interrupt_no_el_change() {
+    daif::mask_all();
+
+    let source_el = get_exception_return_exception_level() >> 2;
+    println!("--------Sync Exception in EL{}--------", source_el);
+    println!("No EL change");
+    println!("Current EL: {}", get_current_el());
+    println!("{:?}", EsrElX::from(get_esr_el1()));
+    println!("Return register address: {:#x}", get_elr_el1());
+    println!("-------------------------------------");
+}
+
+/// Synchronous Exception Handler
+///
+/// Lower Exception level, where the implemented level
+/// immediately lower than the target level is using
+/// AArch64.
+#[no_mangle]
+unsafe extern "C" fn rust_synchronous_interrupt_imm_lower_aarch64() {
+    daif::mask_all();
+
+    let source_el = get_exception_return_exception_level() >> 2;
+    println!("--------Sync Exception in EL{}--------", source_el);
+    println!("Exception escalated to EL {}", get_current_el());
+    println!("Current EL: {}", get_current_el());
+    let esr = EsrElX::from(get_esr_el1());
+    println!("{:?}", EsrElX::from(esr));
+    println!("Return register address: {:#x}", get_elr_el1());
+
+    match esr.ec {
+        0b100100 => {
+            println!("Cause: Data Abort from a lower Exception level");
+        }
+        _ => {}
+    }
+    println!("-------------------------------------");
+
+    set_return_to_kernel_main();
+}
+
+fn clear_interrupt_for_source(source: IRQSource) {
+    match source {
+        IRQSource::UartInt => clear_uart_interrupt_state(),
+        _ => {}
+    }
+}
+
+fn set_return_to_kernel_main() {
+    unsafe {
+        asm!("ldr x0, =kernel_main", "msr ELR_EL1, x0");
+        asm!("mov x0, #(0b0101)", "msr SPSR_EL1, x0");
+    }
+}
+
+fn get_exception_return_exception_level() -> u32 {
+    let spsr: u32;
+    unsafe {
+        asm!("mrs {0:x}, SPSR_EL1", out(reg) spsr);
+    }
+    spsr & 0b1111
+}
+
+/// Read the syndrome information that caused an exception
+///
+/// ESR = Exception Syndrome Register
+fn get_esr_el1() -> u32 {
+    let esr: u32;
+    unsafe {
+        asm!(
+            "mrs {esr:x}, ESR_EL1",
+            esr = out(reg) esr
+        );
+    }
+    esr
+}
+
+/// Read the return address
+///
+/// ELR = Exception Link Registers
+fn get_elr_el1() -> u32 {
+    let elr: u32;
+    unsafe {
+        asm!(
+            "mrs {esr:x}, ELR_EL1",
+            esr = out(reg) elr
+        );
+    }
+    elr
+}
+
+fn handle_gpio_interrupt() {
+    println!("Interrupt");
+    for i in 0..=53u32 {
+        let val = read_gpio_event_detect_status(i);
+
+        if val {
+            #[allow(clippy::single_match)]
+            match i {
+                26 => {
+                    println!("Button Pressed");
+                }
+                _ => {}
+            }
+            // Reset GPIO Interrupt handler by writing a 1
+            reset_gpio_event_detect_status(i);
+        }
+    }
+    unmask_irq();
+}
+
+/// Enables IRQ Source
+pub fn enable_irq_source(state: IRQSource) {
+    let nr = state as u32;
+    let register = ENABLE_IRQ_BASE + 4 * (nr / 32);
+    let register_offset = nr % 32;
+    let current = unsafe { read_address(register) };
+    let mask = 0b1 << register_offset;
+    let new_val = current | mask;
+    unsafe { write_address(register, new_val) };
+}
+
+/// Disable IRQ Source
+pub fn disable_irq_source(state: IRQSource) {
+    let nr = state as u32;
+    let register = DISABLE_IRQ_BASE + 4 * (nr / 32);
+    let register_offset = nr % 32;
+    let current = unsafe { read_address(register) };
+    let mask = 0b1 << register_offset;
+    let new_val = current | mask;
+    unsafe { write_address(register, new_val) };
+}
+
+/// Read current IRQ Source status
+pub fn read_irq_source_status(state: IRQSource) -> u32 {
+    let nr = state as u32;
+    let register = ENABLE_IRQ_BASE + 4 * (nr / 32);
+    let register_offset = nr % 32;
+    (unsafe { read_address(register) } >> register_offset) & 0b1
+}
+
+/// Status if a IRQ Source is pending
+pub fn is_irq_source_pending(state: IRQSource) -> bool {
+    let nr = state as u32;
+    let register = IRQ_PENDING_BASE + 4 * (nr / 32);
+    let register_offset = nr % 32;
+    ((unsafe { read_address(register) } >> register_offset) & 0b1) != 0
+}
+
+/// Status if a IRQ Source is pending
+pub fn get_irq_pending_sources() -> u64 {
+    let mut pending = unsafe { read_address(IRQ_PENDING_BASE + 4) as u64 } << 32;
+    pending |= unsafe { read_address(IRQ_PENDING_BASE) as u64 };
+    pending
+}
+
+pub mod daif {
+    use core::arch::asm;
+
+    #[inline(always)]
+    pub fn mask_all() {
+        unsafe { asm!("msr DAIFSet, #0xf", options(nomem, nostack)) }
+    }
+
+    #[inline(always)]
+    pub fn unmask_all() {
+        unsafe { asm!("msr DAIFClr, #0xf", options(nomem, nostack)) }
+    }
+
+    #[inline(always)]
+    pub fn mask_irq() {
+        unsafe { asm!("msr DAIFSet, #0x2", options(nomem, nostack)) }
+    }
+
+    #[inline(always)]
+    pub fn unmask_irq() {
+        unsafe { asm!("msr DAIFClr, #0x2", options(nomem, nostack)) }
+    }
+}
+
+pub fn initialize_interrupt_handler() {
+    unsafe { INTERRUPT_HANDLERS = Some(Vec::new()) };
+}
+
+pub fn register_interrupt_handler(source: IRQSource, function: fn()) {
+    if let Some(handler_vec) = unsafe { INTERRUPT_HANDLERS.as_mut() } {
+        handler_vec.push(InterruptHandlers { source, function });
+    }
+}

src/irq_interrupt.rs

@@ -1,18 +1,17 @@
-use core::{
+use core::arch::asm;
-    arch::asm,
-    sync::atomic::{compiler_fence, Ordering},
-};
 
-use crate::{mmio_read, mmio_write, peripherals::uart::print};
+use crate::{
+    get_current_el,
+    irq_interrupt::daif::unmask_irq,
+    mmio_read, mmio_write,
+    peripherals::gpio::{read_gpio_event_detect_status, reset_gpio_event_detect_status},
+};
 
 const INTERRUPT_BASE: u32 = 0x3F00_B000;
 const IRQ_PENDING_BASE: u32 = INTERRUPT_BASE + 0x204;
 const ENABLE_IRQ_BASE: u32 = INTERRUPT_BASE + 0x210;
 const DISABLE_IRQ_BASE: u32 = INTERRUPT_BASE + 0x21C;
 
-// GPIO
-const GPEDS_BASE: u32 = 0x3F20_0040;
-
 #[repr(u32)]
 pub enum IRQState {
     AuxInt = 29,
@@ -30,43 +29,139 @@ pub enum IRQState {
     UartInt = 57,
 }
 
+/// Representation of the ESR_ELx registers
+///
+///  Reference: D1.10.4
+#[derive(Debug, Clone, Copy)]
+#[allow(dead_code)]
+struct EsrElX {
+    ec: u32,
+    il: u32,
+    iss: u32,
+}
+
+impl From<u32> for EsrElX {
+    fn from(value: u32) -> Self {
+        Self {
+            ec: value >> 26,
+            il: (value >> 25) & 0b1,
+            iss: value & 0x1FFFFFF,
+        }
+    }
+}
+
 #[no_mangle]
-unsafe extern "C" fn irq_handler() {
+unsafe extern "C" fn rust_irq_handler() {
+    daif::mask_all();
     handle_gpio_interrupt();
+    let source_el = get_exception_return_exception_level() >> 2;
+    println!("Source EL: {}", source_el);
+    println!("Current EL: {}", get_current_el());
+    println!("Return register address: {:#x}", get_elr_el1());
+}
+
+#[no_mangle]
+unsafe extern "C" fn rust_synchronous_interrupt_no_el_change() {
+    daif::mask_all();
+
+    let source_el = get_exception_return_exception_level() >> 2;
+    println!("--------Sync Exception in EL{}--------", source_el);
+    println!("No EL change");
+    println!("Current EL: {}", get_current_el());
+    println!("{:?}", EsrElX::from(get_esr_el1()));
+    println!("Return register address: {:#x}", get_elr_el1());
+    println!("-------------------------------------");
+}
+
+/// Synchronous Exception Handler
+///
+/// Lower Exception level, where the implemented level
+/// immediately lower than the target level is using
+/// AArch64.
+#[no_mangle]
+unsafe extern "C" fn rust_synchronous_interrupt_imm_lower_aarch64() {
+    daif::mask_all();
+
+    let source_el = get_exception_return_exception_level() >> 2;
+    println!("--------Sync Exception in EL{}--------", source_el);
+    println!("Exception escalated to EL {}", get_current_el());
+    println!("Current EL: {}", get_current_el());
+    let esr = EsrElX::from(get_esr_el1());
+    println!("{:?}", EsrElX::from(esr));
+    println!("Return register address: {:#x}", get_elr_el1());
+
+    match esr.ec {
+        0b100100 => {
+            println!("Cause: Data Abort from a lower Exception level");
+        }
+        _ => {}
+    }
+    println!("-------------------------------------");
+
+    set_return_to_kernel_main();
+}
+
+fn set_return_to_kernel_main() {
+    unsafe {
+        asm!("ldr x0, =kernel_main", "msr ELR_EL1, x0");
+        asm!("mov x0, #(0b0101)", "msr SPSR_EL1, x0");
+    }
+}
+
+fn get_exception_return_exception_level() -> u32 {
+    let spsr: u32;
+    unsafe {
+        asm!("mrs {0:x}, SPSR_EL1", out(reg) spsr);
+    }
+    spsr & 0b1111
+}
+
+/// Read the syndrome information that caused an exception
+///
+/// ESR = Exception Syndrome Register
+fn get_esr_el1() -> u32 {
+    let esr: u32;
+    unsafe {
+        asm!(
+            "mrs {esr:x}, ESR_EL1",
+            esr = out(reg) esr
+        );
+    }
+    esr
+}
+
+/// Read the return address
+///
+/// ELR = Exception Link Registers
+fn get_elr_el1() -> u32 {
+    let elr: u32;
+    unsafe {
+        asm!(
+            "mrs {esr:x}, ELR_EL1",
+            esr = out(reg) elr
+        );
+    }
+    elr
 }
 
 fn handle_gpio_interrupt() {
+    println!("Interrupt");
     for i in 0..=53u32 {
         let val = read_gpio_event_detect_status(i);
 
         if val {
+            #[allow(clippy::single_match)]
             match i {
-                26 => print("Button Pressed"),
+                26 => {
+                    println!("Button Pressed");
+                }
                 _ => {}
             }
             // Reset GPIO Interrupt handler by writing a 1
             reset_gpio_event_detect_status(i);
         }
     }
-    enable_irq();
+    unmask_irq();
-}
-
-/// Get current interrupt status of a GPIO pin
-pub fn read_gpio_event_detect_status(id: u32) -> bool {
-    let register = GPEDS_BASE + (id / 32) * 4;
-    let register_offset = id % 32;
-
-    let val = mmio_read(register) >> register_offset;
-    (val & 0b1) != 0
-}
-
-/// Resets current interrupt status of a GPIO pin
-pub fn reset_gpio_event_detect_status(id: u32) {
-    let register = GPEDS_BASE + (id / 32) * 4;
-    let register_offset = id % 32;
-
-    mmio_write(register, 0b1 << register_offset);
-    compiler_fence(Ordering::SeqCst);
 }
 
 /// Enables IRQ Source
@@ -107,16 +202,26 @@ pub fn read_irq_pending(state: IRQState) -> bool {
     ((mmio_read(register) >> register_offset) & 0b1) != 0
 }
 
-/// Clears the IRQ DAIF Mask
+pub mod daif {
-///
+    use core::arch::asm;
-/// Enables IRQ interrupts
+
-pub fn enable_irq() {
+    #[inline(always)]
-    unsafe { asm!("msr DAIFClr, #0x2") }
+    pub fn mask_all() {
+        unsafe { asm!("msr DAIFSet, #0xf", options(nomem, nostack)) }
     }
 
-/// Clears the IRQ DAIF Mask
+    #[inline(always)]
-///
+    pub fn unmask_all() {
-/// Disable IRQ interrupts
+        unsafe { asm!("msr DAIFClr, #0xf", options(nomem, nostack)) }
-pub fn disable_irq() {
+    }
-    unsafe { asm!("msr DAIFSet, #0x2") }
+
+    #[inline(always)]
+    pub fn mask_irq() {
+        unsafe { asm!("msr DAIFSet, #0x2", options(nomem, nostack)) }
+    }
+
+    #[inline(always)]
+    pub fn unmask_irq() {
+        unsafe { asm!("msr DAIFClr, #0x2", options(nomem, nostack)) }
+    }
 }

src/lib.rs

@@ -1,17 +1,77 @@
 #![no_std]
+#![allow(clippy::missing_safety_doc)]
 
-use core::ptr::{read_volatile, write_volatile};
+extern crate alloc;
+
+use alloc::boxed::Box;
+use core::{
+    arch::asm,
+    panic::PanicInfo,
+    ptr::{read_volatile, write_volatile},
+};
+
+use heap::Heap;
+
+use crate::{interrupt_handlers::initialize_interrupt_handler, logger::DefaultLogger};
+
+static PERIPHERAL_BASE: u32 = 0x3F00_0000;
+
+unsafe extern "C" {
+    unsafe static mut __heap_start: u8;
+    unsafe static mut __heap_end: u8;
+}
+
+#[global_allocator]
+pub static mut GLOBAL_ALLOCATOR: Heap = Heap::empty();
+
+pub unsafe fn init_heap() {
+    let start = core::ptr::addr_of_mut!(__heap_start) as usize;
+    let end = core::ptr::addr_of_mut!(__heap_end) as usize;
+
+    let heap = core::ptr::addr_of_mut!(GLOBAL_ALLOCATOR);
+    (*heap).init(start, end);
+}
+
+#[panic_handler]
+fn panic(_panic: &PanicInfo) -> ! {
+    loop {
+        println!("Panic");
+    }
+}
 
 pub mod peripherals;
 
-pub mod irq_interrupt;
+pub mod configuration;
+pub mod framebuffer;
+pub mod interrupt_handlers;
+pub mod logger;
 pub mod mailbox;
+pub mod power_management;
 pub mod timer;
 
-pub fn mmio_read(address: u32) -> u32 {
+#[inline(always)]
+pub unsafe fn read_address(address: u32) -> u32 {
     unsafe { read_volatile(address as *const u32) }
 }
 
-pub fn mmio_write(address: u32, data: u32) {
+#[inline(always)]
+pub unsafe fn write_address(address: u32, data: u32) {
     unsafe { write_volatile(address as *mut u32, data) }
 }
+
+pub fn get_current_el() -> u64 {
+    let el: u64;
+    unsafe {
+        asm!(
+            "mrs {el}, CurrentEL",
+            el = out(reg) el,
+            options(nomem, nostack, preserves_flags)
+        );
+    }
+    el >> 2
+}
+
+pub fn initialize_kernel() {
+    logger::set_logger(Box::new(DefaultLogger));
+    initialize_interrupt_handler();
+}

src/logger.rs

@@ -0,0 +1,47 @@
+use core::fmt::Write;
+
+use alloc::{boxed::Box, fmt};
+
+use crate::peripherals::uart;
+
+static mut LOGGER: Option<Box<dyn Logger>> = None;
+
+pub trait Logger: Write + Sync {
+    fn flush(&mut self);
+}
+
+pub struct DefaultLogger;
+
+impl Logger for DefaultLogger {
+    fn flush(&mut self) {}
+}
+
+impl Write for DefaultLogger {
+    fn write_str(&mut self, s: &str) -> core::fmt::Result {
+        uart::Uart.write_str(s)
+    }
+}
+
+#[macro_export]
+macro_rules! log {
+    () => {};
+    ($($arg:tt)*) => {
+        $crate::logger::log(format_args!($($arg)*))
+    };
+}
+
+pub fn log(args: fmt::Arguments) {
+    unsafe {
+        if let Some(logger) = LOGGER.as_mut() {
+            logger.write_str("\n").unwrap();
+            logger.write_fmt(args).unwrap();
+            logger.flush();
+        }
+    }
+}
+
+pub fn set_logger(logger: Box<dyn Logger>) {
+    unsafe {
+        LOGGER = Some(logger);
+    }
+}

src/mailbox.rs

@@ -0,0 +1,85 @@
+use crate::{read_address, write_address};
+use nova_error::NovaError;
+
+const MBOX_BASE: u32 = 0x3F00_0000 + 0xB880;
+
+// MB0
+const MBOX_READ: u32 = MBOX_BASE;
+const MBOX_STATUS: u32 = MBOX_BASE + 0x18;
+
+// MB1
+const MBOX_WRITE: u32 = MBOX_BASE + 0x20;
+
+// Status
+const MAIL_FULL: u32 = 0x80000000;
+const MAIL_EMPTY: u32 = 0x40000000;
+
+const HEADER_LENGTH: usize = 4 + 4 + 4 + 4 + 4; // Total Size + Request + Tag + MaxBufferLength + RequestLength
+const FOOTER_LENGTH: usize = 4;
+
+macro_rules! max {
+    ($a:expr, $b:expr) => {{
+        const M: usize = if $a > $b { $a as usize } else { $b as usize };
+        M
+    }};
+}
+
+#[macro_export]
+macro_rules! mailbox_command {
+    ($name:ident, $tag:expr, $request_len:expr,$response_len:expr) => {
+        /// More information at: <https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface>
+        pub fn $name(
+            request_data: [u32; $request_len / 4],
+        ) -> Result<[u32; $response_len / 4], NovaError> {
+            let mut mailbox =
+                [0u32; (HEADER_LENGTH + max!($request_len, $response_len) + FOOTER_LENGTH) / 4];
+            mailbox[0] = (HEADER_LENGTH + max!($request_len, $response_len) + FOOTER_LENGTH) as u32; // Total length in Bytes
+            mailbox[1] = 0; // Request
+            mailbox[2] = $tag; // Command Tag
+            mailbox[3] = max!($request_len, $response_len) as u32; // Max value buffer size
+            mailbox[4] = $request_len;
+
+            mailbox[5..(5 + ($request_len / 4))].copy_from_slice(&request_data);
+            mailbox[(5 + ($request_len / 4))..].fill(0);
+
+            let addr = core::ptr::addr_of!(mailbox[0]) as u32;
+
+            write_mailbox(8, addr);
+
+            let _ = read_mailbox(8);
+
+            if mailbox[1] == 0 {
+                return Err(NovaError::Mailbox);
+            }
+
+            let mut out = [0u32; $response_len / 4];
+            out.copy_from_slice(&mailbox[5..(5 + $response_len / 4)]);
+            Ok(out)
+        }
+    };
+}
+
+mailbox_command!(read_soc_temp, 0x0003_0006, 4, 8);
+
+// Framebuffer
+mailbox_command!(get_display_resolution, 0x0004_0003, 0, 8);
+
+pub fn read_mailbox(channel: u32) -> u32 {
+    // Wait until mailbox is not empty
+    loop {
+        while unsafe { read_address(MBOX_STATUS) } & MAIL_EMPTY != 0 {}
+        let mut data = unsafe { read_address(MBOX_READ) };
+        let read_channel = data & 0xF;
+
+        data >>= 4;
+
+        if channel == read_channel {
+            return data;
+        }
+    }
+}
+
+pub fn write_mailbox(channel: u32, data: u32) {
+    while unsafe { read_address(MBOX_STATUS) } & MAIL_FULL != 0 {}
+    unsafe { write_address(MBOX_WRITE, (data & !0xF) | (channel & 0xF)) };
+}

src/main.rs

@@ -1,43 +1,46 @@
 #![no_main]
 #![no_std]
 #![feature(asm_experimental_arch)]
-
+#![allow(static_mut_refs)]
+#![allow(clippy::missing_safety_doc)]
 use core::{
     arch::{asm, global_asm},
-    panic::PanicInfo,
+    ptr::write_volatile,
 };
 
+extern crate alloc;
+
+use alloc::boxed::Box;
 use nova::{
-    irq_interrupt::enable_irq_source,
+    framebuffer::{FrameBuffer, BLUE, GREEN, RED},
+    get_current_el, init_heap,
+    interrupt_handlers::{daif, enable_irq_source, IRQSource},
+    log, mailbox,
     peripherals::{
         gpio::{
-            gpio_get_state, gpio_high, gpio_low, gpio_pull_up, set_falling_edge_detect,
+            blink_gpio, gpio_pull_up, set_falling_edge_detect, set_gpio_function, GPIOFunction,
-            set_gpio_function, GPIOFunction,
+            SpecificGpio,
         },
-        uart::{print, uart_init},
+        uart::uart_init,
     },
-    timer::{delay_nops, sleep_ms, sleep_us},
+    println,
 };
 
 global_asm!(include_str!("vector.S"));
 
 extern "C" {
     fn el2_to_el1();
-}
+    fn el1_to_el0();
-
+    static mut __bss_start: u32;
-#[panic_handler]
+    static mut __bss_end: u32;
-fn panic(_panic: &PanicInfo) -> ! {
-    loop {
-        print("Panic\r\n");
-    }
 }
 
 #[no_mangle]
-#[link_section = ".text._start"]
+#[cfg_attr(not(test), link_section = ".text._start")]
 pub unsafe extern "C" fn _start() {
     // Set the stack pointer
     asm!(
-        "ldr x0, =0x8008000",
+        "ldr x0, =__stack_end",
         "mov sp, x0",
         "b main",
         options(noreturn)
@@ -46,86 +49,90 @@ pub unsafe extern "C" fn _start() {
 
 #[no_mangle]
 pub extern "C" fn main() -> ! {
+    unsafe {
+        zero_bss();
+    }
     enable_uart();
 
     // Set ACT Led to Outout
     let _ = set_gpio_function(21, GPIOFunction::Output);
 
-    print_current_el_str();
+    println!("Hello World!");
-
+    println!("Exception level: {}", get_current_el());
-    // Delay so clock speed can stabilize
-    delay_nops(50000);
-    print("Hello World!\r\n");
 
     unsafe {
+        asm!("mrs x0, SCTLR_EL1",);
         el2_to_el1();
     }
 
+    #[allow(clippy::empty_loop)]
     loop {}
 }
 
+unsafe fn zero_bss() {
+    let mut bss: *mut u32 = &raw mut __bss_start;
+    while bss < &raw mut __bss_end {
+        write_volatile(bss, 0);
+        bss = bss.add(1);
+    }
+}
+
 #[no_mangle]
 pub extern "C" fn kernel_main() -> ! {
-    print_current_el_str();
+    nova::initialize_kernel();
+    println!("Kernel Main");
+    println!("Exception Level: {}", get_current_el());
+    daif::unmask_all();
 
-    sleep_us(500_000);
+    unsafe {
+        init_heap();
+        el1_to_el0();
+    };
+
+    #[allow(clippy::empty_loop)]
+    loop {}
+}
+
+#[no_mangle]
+pub extern "C" fn el0() -> ! {
+    println!("Jumped into EL0");
 
     // Set GPIO 26 to Input
-    enable_irq_source(nova::irq_interrupt::IRQState::GpioInt0); //26 is on the first GPIO bank
+    enable_irq_source(IRQSource::GpioInt0); //26 is on the first GPIO bank
     let _ = set_gpio_function(26, GPIOFunction::Input);
     gpio_pull_up(26);
     set_falling_edge_detect(26, true);
 
+    enable_irq_source(IRQSource::UartInt);
+
+    let fb = FrameBuffer::default();
+
+    fb.draw_square(500, 500, 600, 700, RED);
+    fb.draw_square_fill(800, 800, 900, 900, GREEN);
+    fb.draw_square_fill(1000, 800, 1200, 700, BLUE);
+    fb.draw_square_fill(900, 100, 800, 150, RED | BLUE);
+    fb.draw_string("Hello World! :D\nTest next Line", 500, 5, 3, BLUE);
+
+    fb.draw_function(cos, 100, 101, RED);
+
     loop {
-        let _ = gpio_high(29);
+        let temp = mailbox::read_soc_temp([0]).unwrap();
+        log!("{} °C", temp[1] / 1000);
 
-        sleep_ms(500); // 0.5s
+        blink_gpio(SpecificGpio::OnboardLed as u8, 500);
-        let _ = gpio_low(29);
+
-        sleep_ms(500); // 0.5s
+        let b = Box::new([1, 2, 3, 4]);
-        print_gpio_state();
+        log!("{:?}", b);
     }
 }
 
-fn print_gpio_state() {
+fn cos(x: u32) -> f64 {
-    let state = gpio_get_state(26);
+    libm::cos(x as f64 * 0.1) * 20.0
-
-    let ascii_byte = b'0' + state;
-    let data = [ascii_byte];
-
-    let s = str::from_utf8(&data).unwrap();
-    print(s);
-    print("\r\n");
-}
-
-pub fn get_current_el() -> u64 {
-    let el: u64;
-    unsafe {
-        asm!(
-            "mrs {el}, CurrentEL",
-            el = out(reg) el,
-            options(nomem, nostack, preserves_flags)
-        );
-    }
-    el >> 2
 }
 
 fn enable_uart() {
-    uart_init();
     // Set GPIO Pins to UART
     let _ = set_gpio_function(14, GPIOFunction::Alternative0);
     let _ = set_gpio_function(15, GPIOFunction::Alternative0);
-}
+    uart_init();
-
-fn print_current_el_str() {
-    let el = get_current_el();
-    let el_str = match el {
-        0b11 => "Level 3",
-        0b10 => "Level 2",
-        0b01 => "Level 1",
-        0b00 => "Level 0",
-        _ => "Unknown EL",
-    };
-
-    print(el_str);
-    print("\r\n");
 }

src/peripherals/gpio.rs

@@ -1,17 +1,24 @@
 use core::result::Result;
 use core::result::Result::Ok;
+use core::sync::atomic::{compiler_fence, Ordering};
 
-use crate::timer::delay_nops;
+use crate::timer::{delay_nops, sleep_ms};
-use crate::{mmio_read, mmio_write};
+use crate::{read_address, write_address};
 
 const GPFSEL_BASE: u32 = 0x3F20_0000;
 const GPSET_BASE: u32 = 0x3F20_001C;
 const GPCLR_BASE: u32 = 0x3F20_0028;
 const GPLEV_BASE: u32 = 0x3F20_0034;
+const GPEDS_BASE: u32 = 0x3F20_0040;
+const GPFEN_BASE: u32 = 0x3F20_0058;
 const GPPUD: u32 = 0x3F20_0094;
 const GPPUDCLK_BASE: u32 = 0x3F20_0098;
 const GPREN_BASE: u32 = 0x3F20_004C;
-const GPFEN_BASE: u32 = 0x3F20_0058;
+
+#[repr(u8)]
+pub enum SpecificGpio {
+    OnboardLed = 29,
+}
 
 #[repr(u32)]
 pub enum GPIOFunction {
@@ -30,26 +37,27 @@ pub fn set_gpio_function(gpio: u8, state: GPIOFunction) -> Result<(), &'static s
     let register_index = gpio / 10;
     let register_offset = (gpio % 10) * 3;
     let register_addr = GPFSEL_BASE + (register_index as u32 * 4);
-    let current = mmio_read(register_addr);
+    let current = unsafe { read_address(register_addr) };
 
     let mask = !(0b111 << register_offset);
     let cleared = current & mask;
 
     let new_val = cleared | ((state as u32) << register_offset);
 
-    mmio_write(register_addr, new_val);
+    unsafe { write_address(register_addr, new_val) };
     Ok(())
 }
 
 /// Set the GPIO to high
 ///
-/// Should be used when GPIO function is set to `OUTPUT` via `set_gpio_function`
+/// Should be used when GPIO function is set to `OUTPUT` via `set_gpio_function`,
+/// otherwise setting is ignored
 pub fn gpio_high(gpio: u8) -> Result<(), &'static str> {
     let register_index = gpio / 32;
     let register_offset = gpio % 32;
     let register_addr = GPSET_BASE + (register_index as u32 * 4);
 
-    mmio_write(register_addr, 1 << register_offset);
+    unsafe { write_address(register_addr, 1 << register_offset) };
     Ok(())
 }
 
@@ -61,7 +69,7 @@ pub fn gpio_low(gpio: u8) -> Result<(), &'static str> {
     let register_offset = gpio % 32;
     let register_addr = GPCLR_BASE + (register_index as u32 * 4);
 
-    mmio_write(register_addr, 1 << register_offset);
+    unsafe { write_address(register_addr, 1 << register_offset) };
     Ok(())
 }
 
@@ -71,8 +79,8 @@ pub fn gpio_get_state(gpio: u8) -> u8 {
     let register_offset = gpio % 32;
     let register_addr = GPLEV_BASE + (register_index as u32 * 4);
 
-    let state = mmio_read(register_addr);
+    let state = unsafe { read_address(register_addr) };
-    return ((state >> register_offset) & 0b1) as u8;
+    ((state >> register_offset) & 0b1) as u8
 }
 
 /// Pull GPIO up
@@ -90,47 +98,45 @@ pub fn gpio_pull_down(gpio: u8) {
 }
 
 fn gpio_pull_up_down(gpio: u8, val: u32) {
-    unsafe {
     // Determine GPPUDCLK Register
     let register_addr = GPPUDCLK_BASE + 4 * (gpio as u32 / 32);
     let register_offset = gpio % 32;
 
     // 1. Write Pull up
-        mmio_write(GPPUD, val);
+    unsafe { write_address(GPPUD, val) };
 
     // 2. Delay 150 cycles
     delay_nops(150);
 
     // 3. Write to clock
     let new_val = 0b1 << register_offset;
-        mmio_write(register_addr, new_val);
+    unsafe { write_address(register_addr, new_val) };
 
     // 4. Delay 150 cycles
     delay_nops(150);
 
     // 5. reset GPPUD
-        mmio_write(GPPUD, 0);
+    unsafe { write_address(GPPUD, 0) };
 
     // 6. reset clock
-        mmio_write(register_addr, 0);
+    unsafe { write_address(register_addr, 0) };
-    }
 }
 
-/// Get the current status if falling edge detection is set
+/// Get the current status of the falling edge detection
 pub fn read_falling_edge_detect(gpio: u8) -> bool {
     let register_addr = GPFEN_BASE + 4 * (gpio as u32 / 32);
     let register_offset = gpio % 32;
 
-    let current = mmio_read(register_addr);
+    let current = unsafe { read_address(register_addr) };
     ((current >> register_offset) & 0b1) != 0
 }
 
-/// Get the current status if falling edge detection is set
+/// Get the current status of the rising edge detection
 pub fn read_rising_edge_detect(gpio: u8) -> bool {
     let register_addr = GPREN_BASE + 4 * (gpio as u32 / 32);
     let register_offset = gpio % 32;
 
-    let current = mmio_read(register_addr);
+    let current = unsafe { read_address(register_addr) };
     ((current >> register_offset) & 0b1) != 0
 }
 
@@ -139,7 +145,7 @@ pub fn set_falling_edge_detect(gpio: u8, enable: bool) {
     let register_addr = GPFEN_BASE + 4 * (gpio as u32 / 32);
     let register_offset = gpio % 32;
 
-    let current = mmio_read(register_addr);
+    let current = unsafe { read_address(register_addr) };
     let mask = 0b1 << register_offset;
     let new_val = if enable {
         current | mask
@@ -147,7 +153,7 @@ pub fn set_falling_edge_detect(gpio: u8, enable: bool) {
         current & !mask
     };
 
-    mmio_write(register_addr, new_val);
+    unsafe { write_address(register_addr, new_val) };
 }
 
 /// Enables rising edge detection
@@ -155,7 +161,7 @@ pub fn set_rising_edge_detect(gpio: u8, enable: bool) {
     let register_addr = GPREN_BASE + 4 * (gpio as u32 / 32);
     let register_offset = gpio % 32;
 
-    let current = mmio_read(register_addr);
+    let current = unsafe { read_address(register_addr) };
 
     let mask = 0b1 << register_offset;
     let new_val = if enable {
@@ -164,5 +170,36 @@ pub fn set_rising_edge_detect(gpio: u8, enable: bool) {
         current & !mask
     };
 
-    mmio_write(register_addr, new_val);
+    unsafe { write_address(register_addr, new_val) };
+}
+
+/// Returns with the interrupt status of an GPIO.
+///
+/// GPEDS register is used to record level and edge events on the GPIO pins.
+/// When an event is triggered by the GPIO, the corresponding bit will be set to 1.
+pub fn read_gpio_event_detect_status(id: u32) -> bool {
+    let register = GPEDS_BASE + (id / 32) * 4;
+    let register_offset = id % 32;
+
+    let val = unsafe { read_address(register) } >> register_offset;
+    (val & 0b1) != 0
+}
+
+/// Resets current interrupt status of a GPIO pin.
+pub fn reset_gpio_event_detect_status(id: u32) {
+    let register = GPEDS_BASE + (id / 32) * 4;
+    let register_offset = id % 32;
+
+    unsafe { write_address(register, 0b1 << register_offset) };
+    compiler_fence(Ordering::SeqCst);
+}
+
+// TODO: GPHEN,GPLEN,GPAREN,GPAFEN
+
+pub fn blink_gpio(gpio: u8, duration_ms: u64) {
+    let _ = gpio_high(gpio);
+
+    sleep_ms(duration_ms);
+    let _ = gpio_low(gpio);
+    sleep_ms(duration_ms);
 }

src/peripherals/mod.rs

@@ -1,2 +1,3 @@
 pub mod gpio;
+#[macro_use]
 pub mod uart;

src/peripherals/uart.rs

@@ -1,4 +1,9 @@
-use crate::{mmio_read, mmio_write};
+use core::{
+    arch::asm,
+    fmt::{self, Write},
+};
+
+use crate::{println, read_address, write_address};
 
 const BAUD: u32 = 115200;
 const UART_CLK: u32 = 48_000_000;
@@ -13,19 +18,53 @@ const UART0_FBRD: u32 = 0x3F20_1028;
 
 const UART0_CR: u32 = 0x3F20_1030;
 const UART0_CR_UARTEN: u32 = 1 << 0;
-const UART0_CR_TXE: u32 = 1 << 8;
 
-const UART0_LCRH: u32 = 0x3F20_102c;
+const UART0_CR_TXE: u32 = 1 << 8;
+const UART0_CR_RXE: u32 = 1 << 9;
+
+const UART0_LCRH: u32 = 0x3F20_102C;
 const UART0_LCRH_FEN: u32 = 1 << 4;
 
-/// Print `s` over UART
+const UART0_IMSC: u32 = 0x3F20_1038;
-pub fn print(s: &str) {
+const UART0_IMSC_RXIM: u32 = 1 << 4;
+
+const UART0_ICR: u32 = 0x3F20_1044;
+
+pub struct Uart;
+
+impl Write for Uart {
+    fn write_str(&mut self, s: &str) -> core::fmt::Result {
         for byte in s.bytes() {
-        while mmio_read(UART0_FR) & UART0_FR_TXFF != 0 {}
+            while (unsafe { read_address(UART0_FR) } & UART0_FR_TXFF) != 0 {
-        mmio_write(UART0_DR, byte as u32);
+                unsafe { asm!("nop") }
+            }
+            unsafe { write_address(UART0_DR, byte as u32) };
         }
         // wait till uart is not busy anymore
-    while (mmio_read(UART0_FR) >> 3) & 0b1 != 0 {}
+        while ((unsafe { read_address(UART0_FR) } >> 3) & 0b1) != 0 {}
+        Ok(())
+    }
+}
+
+#[macro_export]
+macro_rules! print {
+    () => {};
+    ($($arg:tt)*) => {
+        $crate::peripherals::uart::_print(format_args!($($arg)*))
+    };
+}
+
+#[macro_export]
+macro_rules! println {
+    () => {};
+    ($($arg:tt)*) => {
+        $crate::print!($($arg)*);
+        $crate::print!("\r\n");
+    };
+}
+
+pub fn _print(args: fmt::Arguments) {
+    let _ = Uart.write_fmt(args);
 }
 
 /// Initialize UART peripheral
@@ -36,23 +75,26 @@ pub fn uart_init() {
     let fbrd = baud_div_times_64 % 64;
 
     uart_enable(false);
-    uart_fifo_enable(false);
+    uart_fifo_enable(true);
 
-    mmio_write(UART0_IBRD, ibrd);
+    unsafe {
-    mmio_write(UART0_FBRD, fbrd);
+        write_address(UART0_IBRD, ibrd);
+        write_address(UART0_FBRD, fbrd);
+    }
 
+    uart_enable_rx_interrupt();
     uart_set_lcrh(0b11, true);
 
-    // Enable transmit and uart
+    // Enable transmit, receive and uart
-    let mut cr = mmio_read(UART0_CR);
+    let mut cr = unsafe { read_address(UART0_CR) };
-    cr |= UART0_CR_UARTEN | UART0_CR_TXE;
+    cr |= UART0_CR_UARTEN | UART0_CR_TXE | UART0_CR_RXE;
 
-    mmio_write(UART0_CR, cr);
+    unsafe { write_address(UART0_CR, cr) };
 }
 
 /// Enable UARTEN
 fn uart_enable(enable: bool) {
-    let mut cr = mmio_read(UART0_CR);
+    let mut cr = unsafe { read_address(UART0_CR) };
 
     if enable {
         cr |= UART0_CR_UARTEN;
@@ -60,12 +102,12 @@ fn uart_enable(enable: bool) {
         cr &= !UART0_CR_UARTEN;
     }
 
-    mmio_write(UART0_CR, cr);
+    unsafe { write_address(UART0_CR, cr) };
 }
 
 /// Enable UART FIFO
 fn uart_fifo_enable(enable: bool) {
-    let mut lcrh = mmio_read(UART0_LCRH);
+    let mut lcrh = unsafe { read_address(UART0_LCRH) };
 
     if enable {
         lcrh |= UART0_LCRH_FEN;
@@ -73,7 +115,11 @@ fn uart_fifo_enable(enable: bool) {
         lcrh &= !UART0_LCRH_FEN;
     }
 
-    mmio_write(UART0_LCRH, lcrh);
+    unsafe { write_address(UART0_LCRH, lcrh) };
+}
+
+fn uart_enable_rx_interrupt() {
+    unsafe { write_address(UART0_IMSC, UART0_IMSC_RXIM) };
 }
 
 /// Set UART word length and set FIFO status
@@ -82,5 +128,15 @@ fn uart_set_lcrh(wlen: u32, enable_fifo: bool) {
     if enable_fifo {
         value |= UART0_LCRH_FEN;
     }
-    mmio_write(UART0_LCRH, value);
+    unsafe { write_address(UART0_LCRH, value) };
+}
+
+pub fn read_uart_data() -> char {
+    (unsafe { read_address(UART0_DR) } & 0xFF) as u8 as char
+}
+
+pub fn clear_uart_interrupt_state() {
+    unsafe {
+        write_address(UART0_ICR, 1 << 4);
+    }
 }

src/power_management.rs

@@ -0,0 +1,27 @@
+use core::ptr::{read_volatile, write_volatile};
+
+use crate::PERIPHERAL_BASE;
+
+/// Power Management Base
+static PM_BASE: u32 = PERIPHERAL_BASE + 0x10_0000;
+static PM_RSTC: u32 = PM_BASE + 0x1c;
+static PM_WDOG: u32 = PM_BASE + 0x24;
+
+static PM_PASSWORD: u32 = 0x5a000000;
+static PM_WDOG_TIMER_MASK: u32 = 0x000fffff;
+static PM_RSTC_WRCFG_CLR: u32 = 0xffffffcf;
+static PM_RSTC_WRCFG_FULL_RESET: u32 = 0x00000020;
+
+pub fn reboot_system() {
+    unsafe {
+        let pm_rstc_val = read_volatile(PM_RSTC as *mut u32);
+        // (31:16) bits -> password
+        // (11:0) bits -> value
+        write_volatile(PM_WDOG as *mut u32, PM_PASSWORD | (1 & PM_WDOG_TIMER_MASK));
+        write_volatile(
+            PM_RSTC as *mut u32,
+            PM_PASSWORD | (pm_rstc_val & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET,
+        );
+    }
+    loop {}
+}

src/terminal.rs

@@ -0,0 +1,53 @@
+use core::fmt::Write;
+
+use alloc::string::String;
+use nova::{
+    interrupt_handlers::register_interrupt_handler, logger::Logger,
+    peripherals::uart::read_uart_data, print, println,
+};
+
+pub struct Terminal {
+    buffer: String,
+    input: String,
+}
+
+impl Terminal {
+    pub fn new() -> Self {
+        Self {
+            buffer: String::new(),
+            input: String::new(),
+        }
+    }
+
+    fn flush(&mut self) {
+        println!("{}", self.buffer);
+        print!("> {}", self.input);
+        self.buffer.clear();
+    }
+}
+
+impl Write for Terminal {
+    fn write_str(&mut self, s: &str) -> core::fmt::Result {
+        self.buffer.push_str(s);
+        Ok(())
+    }
+}
+
+impl Logger for Terminal {
+    fn flush(&mut self) {
+        println!("{}", self.buffer);
+        print!("> {}", self.input);
+        self.buffer.clear();
+    }
+}
+
+fn terminal_uart_rx_interrupt_handler() {
+    print!("{}", read_uart_data());
+}
+
+pub fn register_terminal_interrupt_handler() {
+    register_interrupt_handler(
+        nova::interrupt_handlers::IRQSource::UartInt,
+        terminal_uart_rx_interrupt_handler,
+    );
+}

src/timer.rs

@@ -1,32 +1,61 @@
-use crate::mmio_read;
+use core::{hint::spin_loop, ptr::read_volatile};
 
-const TIMER_CLO: u32 = 0x3F00_3004;
+const TIMER_CLOCK_LO: u32 = 0x3F00_3004;
+const TIMER_CLOCK_HI: u32 = 0x3F00_3008;
 
-fn read_clo() -> u32 {
+fn read_timer_32() -> u32 {
-    return mmio_read(TIMER_CLO);
+    unsafe { read_volatile(TIMER_CLOCK_LO as *const u32) }
+}
+
+fn read_timer_64() -> u64 {
+    loop {
+        let clock_hi1 = unsafe { read_volatile(TIMER_CLOCK_HI as *const u32) };
+        let clock_lo = unsafe { read_volatile(TIMER_CLOCK_LO as *const u32) };
+        let clock_hi2 = unsafe { read_volatile(TIMER_CLOCK_HI as *const u32) };
+
+        // account for roll over during read
+        if clock_hi1 == clock_hi2 {
+            return ((clock_hi1 as u64) << 32) | clock_lo as u64;
+        }
+    }
 }
 
 /// Sleep for `us` microseconds
-pub fn sleep_us(us: u32) {
+pub fn sleep_us(us: u64) {
-    let start = read_clo();
+    if us < u32::MAX as u64 {
-    while read_clo() - start < us {
+        sleep_us_u32(us as u32);
-        unsafe { core::arch::asm!("nop") }
+    } else {
+        sleep_us_u64(us);
+    }
+}
+
+fn sleep_us_u32(us: u32) {
+    let start = read_timer_32();
+    while read_timer_32().wrapping_sub(start) < us {
+        spin_loop();
+    }
+}
+
+fn sleep_us_u64(us: u64) {
+    let start = read_timer_64();
+    while read_timer_64().wrapping_sub(start) < us {
+        spin_loop();
     }
 }
 
 /// Sleep for `ms` milliseconds
-pub fn sleep_ms(ms: u32) {
+pub fn sleep_ms(ms: u64) {
-    sleep_us(ms * 1000);
+    sleep_us(ms * 1_000);
 }
 
 /// Sleep for `s` seconds
-pub fn sleep_s(s: u32) {
+pub fn sleep_s(s: u64) {
-    sleep_us(s * 1000);
+    sleep_ms(s * 1_000);
 }
 
 /// Wait for `count` operations to pass
 pub fn delay_nops(count: u32) {
     for _ in 0..count {
-        unsafe { core::arch::asm!("nop") }
+        spin_loop()
     }
 }

src/vector.S

@@ -14,14 +14,16 @@ vector_table:
     ventry .
     ventry .
 
-    ventry .
+    ventry synchronous_interrupt_no_el_change  // Synchronous Exception  0x200
     ventry irq_handler                // IRQ(Interrupt Request) 0x280
     ventry .
     ventry .
 
+    ventry synchronous_interrupt_imm_lower_aarch64
+    ventry irq_handler
+
 
 .align 4
-.extern main
 .global el2_to_el1
 el2_to_el1:
 
@@ -32,7 +34,7 @@ el2_to_el1:
     mov x0, #(0b0101)
     msr SPSR_EL2, x0
 
-    // Set return address to ELR_EL2
+    // Set return address to kernel_main
     ldr x0, =kernel_main
     msr ELR_EL2, x0
 
@@ -44,7 +46,131 @@ el2_to_el1:
     adr x0, vector_table
     msr VBAR_EL1, x0
 
-    isb
+    // Disable MMU
+    ldr x0, =SCTLR_EL1_CONF
+    msr sctlr_el1, x0
+
+    // SIMD should not be trapped
+    mrs x0, CPACR_EL1
+    mov x1, #(0b11<<20)
+    orr x0,x0, x1
+    msr CPACR_EL1,x0
 
     // Return to EL1
     eret
+
+.align 4
+.global el1_to_el0
+el1_to_el0:
+
+    // Set SPSR_EL1: return to EL0t
+    mov x0, #(0b0000)
+    msr SPSR_EL1, x0
+
+    // Set return address to el0
+    ldr x0, =el0
+    msr ELR_EL1, x0
+
+    // Set SP_EL1 to stack base
+    ldr x0, =__stack_end_el0
+    msr SP_EL0, x0
+
+    // Return to EL0
+    eret
+
+
+.align 4
+irq_handler:
+    sub sp, sp, #176
+    stp x0, x1, [sp, #0]
+    stp x2, x3, [sp, #16]
+    stp x4, x5, [sp, #32]
+    stp x6, x7, [sp, #48]
+    stp x8, x9, [sp, #64]
+    stp x10, x11, [sp, #80]
+    stp x12, x13, [sp, #96]
+    stp x14, x15, [sp, #112]
+    stp x16, x17, [sp, #128]
+    stp x18, x29, [sp, #144]
+    stp x30, xzr, [sp, #160]
+
+    bl rust_irq_handler
+
+    ldp x0, x1, [sp, #0]
+    ldp x2, x3, [sp, #16]
+    ldp x4, x5, [sp, #32]
+    ldp x6, x7, [sp, #48]
+    ldp x8, x9, [sp, #64]
+    ldp x10, x11, [sp, #80]
+    ldp x12, x13, [sp, #96]
+    ldp x14, x15, [sp, #112]
+    ldp x16, x17, [sp, #128]
+    ldp x18, x29, [sp, #144]
+    ldp x30, xzr, [sp, #160]
+    add sp, sp, #176
+
+    eret
+
+.align 4
+synchronous_interrupt_imm_lower_aarch64:
+    sub sp, sp, #176
+    stp x0, x1, [sp, #0]
+    stp x2, x3, [sp, #16]
+    stp x4, x5, [sp, #32]
+    stp x6, x7, [sp, #48]
+    stp x8, x9, [sp, #64]
+    stp x10, x11, [sp, #80]
+    stp x12, x13, [sp, #96]
+    stp x14, x15, [sp, #112]
+    stp x16, x17, [sp, #128]
+    stp x18, x29, [sp, #144]
+    stp x30, xzr, [sp, #160]
+
+    bl rust_synchronous_interrupt_imm_lower_aarch64
+
+    ldp x0, x1, [sp, #0]
+    ldp x2, x3, [sp, #16]
+    ldp x4, x5, [sp, #32]
+    ldp x6, x7, [sp, #48]
+    ldp x8, x9, [sp, #64]
+    ldp x10, x11, [sp, #80]
+    ldp x12, x13, [sp, #96]
+    ldp x14, x15, [sp, #112]
+    ldp x16, x17, [sp, #128]
+    ldp x18, x29, [sp, #144]
+    ldp x30, xzr, [sp, #160]
+    add sp, sp, #176
+
+    eret
+
+.align 4
+synchronous_interrupt_no_el_change:
+    sub sp, sp, #176
+    stp x0, x1, [sp, #0]
+    stp x2, x3, [sp, #16]
+    stp x4, x5, [sp, #32]
+    stp x6, x7, [sp, #48]
+    stp x8, x9, [sp, #64]
+    stp x10, x11, [sp, #80]
+    stp x12, x13, [sp, #96]
+    stp x14, x15, [sp, #112]
+    stp x16, x17, [sp, #128]
+    stp x18, x29, [sp, #144]
+    stp x30, xzr, [sp, #160]
+
+    bl rust_synchronous_interrupt_no_el_change
+
+    ldp x0, x1, [sp, #0]
+    ldp x2, x3, [sp, #16]
+    ldp x4, x5, [sp, #32]
+    ldp x6, x7, [sp, #48]
+    ldp x8, x9, [sp, #64]
+    ldp x10, x11, [sp, #80]
+    ldp x12, x13, [sp, #96]
+    ldp x14, x15, [sp, #112]
+    ldp x16, x17, [sp, #128]
+    ldp x18, x29, [sp, #144]
+    ldp x30, xzr, [sp, #160]
+    add sp, sp, #176
+
+    eret

tools/deply_to_hw.sh

@@ -15,7 +15,7 @@ REMOTE_DIR="$TFTP_PATH"
 
 # BUILD
 echo "[*] Building kernel..."
-cargo build --release
+cargo build --release --target aarch64-unknown-none
 
 # CONVERT TO IMG
 echo "[*] Convert kernel elf to img..."

tools/start_simulator.sh

@@ -8,5 +8,4 @@ qemu-system-aarch64 \
   -cpu cortex-a53 \
   -serial stdio \
   -sd ../sd.img \
-  -display none \
   -kernel ../target/aarch64-unknown-none/release/kernel8.img

tools/start_simulator_debug.sh

@@ -10,4 +10,5 @@ qemu-system-aarch64 \
   -serial stdio \
   -sd ../sd.img \
   -display none \
-  -kernel ../target/aarch64-unknown-none/debug/kernel8.img
+  -kernel ../target/aarch64-unknown-none/debug/kernel8.img \
+  -s -S