Implement first basic interrupt handler

.gitignore

@@ -1,3 +1,4 @@
 /target
 kernel8.img
 .env
+sd.img

.vscode/launch.json

@@ -12,13 +12,18 @@
       "stopAtEntry": true,
       "externalConsole": false,
       "MIMode": "gdb",
-      "setupCommands": [
+"setupCommands": [
-        {
+  {
-          "description": "Enable pretty-printing for gdb",
+    "description": "Enable pretty-printing for gdb",
-          "text": "-enable-pretty-printing",
+    "text": "-enable-pretty-printing",
-          "ignoreFailures": true
+    "ignoreFailures": true
-        }
+  },
-      ],
+  {
+    "description": "Show assembly on stop",
+    "text": "layout asm",
+    "ignoreFailures": true
+  }
+],
       "preLaunchTask": "Run QEMU"
     }
   ]

.vscode/tasks.json

@@ -14,8 +14,9 @@
     {
       "label": "Run QEMU",
       "type": "shell",
-      "command": "qemu-system-aarch64 -M raspi3b -cpu cortex-a53 -display none -kernel ${workspaceFolder}/target/aarch64-unknown-none/debug/nova -s -S -serial stdio",
+      "command": "qemu-system-aarch64 -M raspi3b -cpu cortex-a53 -serial stdio -sd sd.img -display none -kernel ${workspaceFolder}/target/aarch64-unknown-none/debug/kernel8.img -S -s",
-      "isBackground": true
+      "isBackground": true,
+      "dependsOn": ["Build"]
     }
   ]
 }

link.ld

@@ -1,7 +1,7 @@
 SECTIONS {
     . = 0x80000;
 
-    .text : {
+    .text ALIGN(4) : {
         KEEP(*(.text._start))
         *(.text .text.*)
     }
@@ -23,6 +23,18 @@ SECTIONS {
         __bss_end = .;
     }
 
+    .vector_table ALIGN(2048) : {
+        KEEP(*(.vector_table))
+    }
+
+    .stack 0x8008000 : ALIGN(16)
+    {
+    __stack_start = .;
+    .+=0x10000;
+    __stack_end = .;
+    }
+
+
     _end = .;
 }
 

src/gpio.rs

@@ -11,6 +11,8 @@ const GPCLR_BASE: u32 = 0x3F20_0028;
 const GPLEV_BASE: u32 = 0x3F20_0034;
 const GPPUD: u32 = 0x3F20_0094;
 const GPPUDCLK_BASE: u32 = 0x3F20_0098;
+const GPREN_BASE: u32 = 0x3F20_004C;
+const GPFEN_BASE: u32 = 0x3F20_0058;
 
 #[repr(u32)]
 pub enum GPIOState {
@@ -112,3 +114,40 @@ fn gpio_pull_up_down(gpio: u8, val: u32) {
         write_volatile(register_addr as *mut u32, 0);
     }
 }
+
+pub fn gpio_enable_low_detect(gpio: u8, enable: bool) {
+    unsafe {
+        // Determine GPLEN Register
+        let register_addr = GPFEN_BASE + 4 * (gpio as u32 / 32);
+        let register_offset = gpio % 32;
+
+        let current = read_volatile(register_addr as *const u32);
+        let mask = 0b1 << register_offset;
+        let new_val = if enable {
+            current | mask
+        } else {
+            current & !mask
+        };
+
+        write_volatile(register_addr as *mut u32, new_val);
+    }
+}
+
+pub fn gpio_enable_high_detect(gpio: u8, enable: bool) {
+    unsafe {
+        // Determine GPHEN Register
+        let register_addr = GPREN_BASE + 4 * (gpio as u32 / 32);
+        let register_offset = gpio % 32;
+
+        let current = read_volatile(register_addr as *const u32);
+
+        let mask = 0b1 << register_offset;
+        let new_val = if enable {
+            current | mask
+        } else {
+            current & !mask
+        };
+
+        write_volatile(register_addr as *mut u32, new_val);
+    }
+}

src/interrupt.rs

@@ -0,0 +1,37 @@
+use core::{
+    arch::asm,
+    ptr::{read_volatile, write_volatile},
+};
+
+use crate::uart::print;
+
+const INTERRUPT_BASE: u32 = 0x3F00_B000;
+const ENABLE_IRQ_BASE: u32 = INTERRUPT_BASE + 0x210;
+const DISABLE_IRQ_BASE: u32 = INTERRUPT_BASE + 0x21C;
+
+#[no_mangle]
+pub unsafe extern "C" fn irq_handler() {
+    print("Interrupt\r\n");
+}
+
+pub fn enable_iqr_source(nr: u32) {
+    let register = ENABLE_IRQ_BASE + 4 * (nr / 32);
+    let register_offset = nr % 32;
+    unsafe {
+        let current = read_volatile(register as *const u32);
+        let mask = 0b1 << register_offset;
+        let new_val = current | mask;
+        write_volatile(register as *mut u32, new_val);
+    }
+}
+
+pub fn disable_iqr_source(nr: u32) {
+    let register = DISABLE_IRQ_BASE + 4 * (nr / 32);
+    let register_offset = nr % 32;
+    unsafe {
+        let current = read_volatile(register as *const u32);
+        let mask = 0b1 << register_offset;
+        let new_val = current | mask;
+        write_volatile(register as *mut u32, new_val);
+    }
+}

src/main.rs

@@ -2,20 +2,33 @@
 #![no_std]
 #![feature(asm_experimental_arch)]
 
-use core::{arch::asm, panic::PanicInfo};
+use core::{
+    arch::{asm, global_asm},
+    panic::PanicInfo,
+};
 
-use gpio::{gpio_get_state, gpio_high, gpio_low, gpio_pull_up, set_gpio_state};
+use gpio::{
+    gpio_enable_low_detect, gpio_get_state, gpio_high, gpio_low, gpio_pull_up, set_gpio_state,
+};
+use interrupt::enable_iqr_source;
 use timer::{delay_nops, sleep};
 use uart::print;
 
 mod gpio;
+mod interrupt;
 mod timer;
 mod uart;
 
+global_asm!(include_str!("vector.S"));
+
+extern "C" {
+    fn el2_to_el1();
+}
+
 #[panic_handler]
 fn panic(_panic: &PanicInfo) -> ! {
     loop {
-        uart::print("Panic");
+        uart::print("Panic\r\n");
     }
 }
 
@@ -23,13 +36,17 @@ fn panic(_panic: &PanicInfo) -> ! {
 #[link_section = ".text._start"]
 pub unsafe extern "C" fn _start() {
     // Set the stack pointer
-    asm!("ldr x0, =0x8004000", "mov sp, x0");
+    asm!(
-    main();
+        "ldr x0, =0x8008000",
+        "mov sp, x0",
+        "b main",
+        options(noreturn)
+    );
 }
 
 #[no_mangle]
-extern "C" fn main() {
+pub extern "C" fn main() -> ! {
-    uart::configure_uart();
+    uart::uart_init();
     // Set ACT Led to Outout
     let _ = set_gpio_state(21, gpio::GPIOState::Output);
 
@@ -37,16 +54,32 @@ extern "C" fn main() {
     let _ = set_gpio_state(14, gpio::GPIOState::Alternative0);
     let _ = set_gpio_state(15, gpio::GPIOState::Alternative0);
 
-    // Set GPIO 21 to Input
+    print_current_el_str();
-    let _ = set_gpio_state(21, gpio::GPIOState::Input);
-    gpio_pull_up(21);
 
     // Delay so clock speed can stabilize
     delay_nops(50000);
     uart::print("Hello World!\r\n");
 
+    unsafe {
+        el2_to_el1();
+    }
+
+    loop {}
+}
+
+#[no_mangle]
+pub extern "C" fn kernel_main() -> ! {
+    let el = get_current_el();
+    print_current_el_str();
+
     sleep(500_000);
 
+    // Set GPIO 21 to Input
+    enable_iqr_source(49); //21 is on the first GPIO bank
+    let _ = set_gpio_state(21, gpio::GPIOState::Input);
+    gpio_pull_up(21);
+    gpio_enable_low_detect(21, true);
+
     loop {
         let _ = gpio_high(29);
 
@@ -67,3 +100,29 @@ fn print_gpio_state() {
     print(s);
     print("\r\n");
 }
+
+pub fn get_current_el() -> u64 {
+    let el: u64;
+    unsafe {
+        asm!(
+            "mrs {el}, CurrentEL",
+            el = out(reg) el,
+            options(nomem, nostack, preserves_flags)
+        );
+    }
+    el >> 2
+}
+
+fn print_current_el_str() {
+    let el = get_current_el();
+    let el_str = match el {
+        0b11 => "Level 3",
+        0b10 => "Level 2",
+        0b01 => "Level 1",
+        0b00 => "Level 0",
+        _ => "Unknown EL",
+    };
+
+    print(el_str);
+    print("\r\n");
+}

src/uart.rs

@@ -27,7 +27,7 @@ pub fn print(s: &str) {
     unsafe { while (core::ptr::read_volatile(UART0_FR as *const u32) >> 3) & 0b1 != 0 {} }
 }
 
-pub fn configure_uart() {
+pub fn uart_init() {
     let baud_div_times_64 = (UART_CLK * 4) / BAUD;
 
     let ibrd = baud_div_times_64 / 64;
@@ -45,6 +45,7 @@ pub fn configure_uart() {
         // Enable transmit and uart
         let mut cr = core::ptr::read_volatile(UART0_CR as *mut u32);
         cr |= UART0_CR_UARTEN | UART0_CR_TXE;
+
         core::ptr::write_volatile(UART0_CR as *mut u32, cr);
     }
 }

src/vector.S

@@ -0,0 +1,51 @@
+
+.global vector_table
+.extern irq_handler
+
+.macro    ventry    label
+.align    7
+b    \label
+.endm
+
+.section .vector_table, "ax"
+vector_table:
+    ventry .
+    ventry .
+    ventry .
+    ventry .
+
+    ventry .
+    ventry irq_handler     // IRQ(Interrupt Request) 0x280
+
+
+.align 4
+.extern main
+.global el2_to_el1
+el2_to_el1:
+
+    mov x0, #(1 << 31)
+    msr HCR_EL2, x0
+    isb
+
+    // Set SPSR_EL2: return to EL1h (EL1, using SP_EL1)
+    mov x0, #(0b0101)
+    msr SPSR_EL2, x0
+    isb
+
+    // Set return address to ELR_EL2
+    ldr x0, =kernel_main
+    msr ELR_EL2, x0
+    isb
+
+    // Set SP_EL1 to stack base
+    ldr x0, =__stack_end
+    msr SP_EL1, x0
+    isb
+
+    // Set VBAR_EL1 to vector table
+    adr x0, vector_table
+    msr VBAR_EL1, x0
+    isb
+
+    // Return to EL1
+    eret

tools/build_debug.sh

@@ -2,3 +2,4 @@ cd "$(dirname "$0")"
 cd ".."
 
 cargo build --target aarch64-unknown-none
+llvm-objcopy -O binary ../target/aarch64-unknown-none/debug/nova ../target/aarch64-unknown-none/debug/kernel8.img

tools/build_release.sh

@@ -1,4 +1,4 @@
 cd "$(dirname "$0")"
-cd ".."
 
 cargo build --target aarch64-unknown-none --release
+llvm-objcopy -O binary ../target/aarch64-unknown-none/release/nova ../target/aarch64-unknown-none/release/kernel8.img

tools/deply_to_hw.sh

@@ -6,23 +6,23 @@ set -a
 source ../.env
 set +a
 
-set -e  # Stop on errors
+set -e
 
 
-# === RESOLVE VARIABLES ===
+# RESOLVE VARIABLES
 REMOTE="$REMOTE_USER@$REMOTE_HOST"
 REMOTE_DIR="$TFTP_PATH"
 
-# === BUILD ===
+# BUILD
 echo "[*] Building kernel..."
 cargo build --release
 
-# === CONVERT TO IMG ===
+# CONVERT TO IMG
 echo "[*] Convert kernel elf to img..."
 llvm-objcopy -O binary "../$BUILD_PATH/$BINARY_NAME" ../$BUILD_PATH/kernel8.img
 
 
-# === COPY TO TFTP ===
+# COPY TO TFTP
 echo "[*] Copying firmware files to TFTP server..."
 scp ../firmware_files/* "$REMOTE:$REMOTE_DIR/."
 echo "[*] Copying kernel to TFTP server..."

tools/generate_kernel.sh

@@ -1,3 +0,0 @@
-cd "$(dirname "$0")"
-
-llvm-objcopy -O binary ../target/aarch64-unknown-none/release/nova ../kernel8.img

tools/generate_sd_card.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+set -e
+
+# Config
+IMAGE_NAME="sd.img"
+IMAGE_SIZE_MB=64
+FIRMWARE_DIR="./firmware_files"
+
+
+# Clean up existing image
+if [ -f "$IMAGE_NAME" ]; then
+    echo "[*] Removing existing $IMAGE_NAME..."
+    rm -f "$IMAGE_NAME"
+fi
+
+# Create empty image
+echo "[*] Creating ${IMAGE_SIZE_MB}MB SD image..."
+dd if=/dev/zero of="$IMAGE_NAME" bs=1M count=$IMAGE_SIZE_MB
+
+# Format image as FAT32
+echo "[*] Formatting image as FAT32..."
+mformat -i sd.img -F ::
+
+# Copy all files from firmware_files/ into root of SD image
+echo "[*] Copying files from '$FIRMWARE_DIR' to image..."
+mcopy -i "$IMAGE_NAME" -s "$FIRMWARE_DIR"/* ::/
+
+echo "[✓] SD card image '$IMAGE_NAME' is ready."

tools/start_simulator.sh

@@ -1,3 +1,12 @@
+cargo build --target aarch64-unknown-none --release
 cd "$(dirname "$0")"
 
-qemu-system-aarch64 -M raspi3b -cpu cortex-a53 -serial stdio -display none -kernel ../target/aarch64-unknown-none/release/nova -s
+llvm-objcopy -O binary ../target/aarch64-unknown-none/release/nova ../target/aarch64-unknown-none/release/kernel8.img
+
+qemu-system-aarch64 \
+  -M raspi3b \
+  -cpu cortex-a53 \
+  -serial stdio \
+  -sd ../sd.img \
+  -display none \
+  -kernel ../target/aarch64-unknown-none/release/kernel8.img

tools/start_simulator_debug.sh

@@ -1,3 +1,13 @@
+cargo build --target aarch64-unknown-none
+
 cd "$(dirname "$0")"
 
-qemu-system-aarch64 -M raspi3b -cpu cortex-a53 -serial stdio -display none -kernel ../target/aarch64-unknown-none/debug/nova -s
+llvm-objcopy -O binary ../target/aarch64-unknown-none/debug/nova ../target/aarch64-unknown-none/debug/kernel8.img
+
+qemu-system-aarch64 \
+  -M raspi3b \
+  -cpu cortex-a53 \
+  -serial stdio \
+  -sd ../sd.img \
+  -display none \
+  -kernel ../target/aarch64-unknown-none/debug/kernel8.img